RaidSonic IB-NAS5520 Manual - 5.2
Manual IB-NAS5520
14
This should be the same name as your workgroup. In general, the default WORKGROUP will work,
but if your workstation belongs to a different group, change it and clickApply to save it.
5.1.2 Administration
Administrator
This is the account used to manage your network drive. The user name “admin” cannot be changed
but we strongly recommend changing the password as soon as you have logged in for the first time,
to prevent any unauthorized access. To change the password, enter your new password, verify it and
click OK to apply the changes.
5.1.3 Date and Time
Automatic
If internet access is available, we recommend setting the renew mode to “Automatic”. Select a time
server from the list, enable daylight savings if required and then clickSave to apply the new settings.
It will automatically synchronize the date & time over the internet with a time server.
Manually
When set to “Manually”, you can enter the date & time manually and click Save to apply the settings.
You can also click on Sync with PC to synchronize the time with your computer.
The date and time settings are only accurate as long as the power is turned on. If the renew mode is
set to “Manually” and you turn off or remove the power supply, the date and time are reset! If the
renew mode is set to “Automatic” and a time server is selected, it will automatically synchronize the
time at start up.
5.2
N
ETWORK
5.2.1 IP Setting
By default, the IP Setting is set to Automatic IP. This is the recommended setting and will allow the
network drive to obtain its IP address automatically. If you prefer setting it manually, select the Static
IP option, enter your own values and click Apply to confirm the new settings.
Setting it manually is useful when you need to have a static IP address in order to mount the network
drive or set up port forwarding. To find out the correct settings for a static IP setup, refer to your
network router settings or ask your system administrator.
5.2.2 PPPoE
If you are using DSL or a cable modem to connect to the Internet and your network hub, switch or
router does not dial‐up automatically, enter the PPPoE (Point to Point Protocol over Ethernet)
account information you have received from your provider here and all local users can share one
PPPoE connection to access the Internet.
Term
Meaning
Status
Displays the PPPoE connection status.
Service Name This is an ISP name or a class of service on the PPPoE server.
User Name
Enter your user name provided by your ISP (Internet Service Provider).