Rail King Docksider 0-4-0 Operating Instructions Manual - page 13

13

0-4-0 Steam Engine Instructions

To remove the 0-4-0 locomotive boiler from its chassis, follow the body

removal instructions (see figure 15).  Once the body has been removed, 

rotate the headlight bulb counter-clockwise as seen in Figure 16 to

remove.  

To remove the caboose car body from its chassis, turn the car over and

locate and remove the four mounting screws (one in each corner of the 

car as seen in Figure 17) attaching the body to the chassis.  Once the

screws are removed, gently lift the car body up and away from the

chassis.

After removing the body from the chassis, turn the chassis over and

locate the car interior lamp housing mounted on the inside of the

chassis.  Remove the burned out bulb by pushing the bulb downward

and rotating it counter-clockwise as seen in Figure 18.  Once the bulb

has been removed, install the replacement bulb by pushing down and

turning the bulb clockwise to lock into place.

Figure 17:  Removing the caboose body from its chassis..

Figure 18:  Locating and removing the

interior bulb.