Rail King Docksider 0-4-0 Operating Instructions Manual - Compatibility
3
0-4-0 Steam Engine Instructions
Compatibility
Our designers have sized the engine to operate on any traditional 0-27
or larger O Gauge track system, including RealTrax® using any
standard AC transformer including the Z-500 transformer packaged in
your set. (See page 19 for a complete list of compatible transformers as
well as wiring instructions.) All RailKing® products are compatible with
most other 3-rail locomotives, rolling stock, and accessories.
Equipment Options
Your ready-to-run set features a 0-4-0 steam locomotive equipped with
an operating headlight, mechanical whistle, ProtoSmoke® operating
smoke unit and a solid state electronic reverse unit. All are simple and
fun to operate. In addition to the locomotive, your set should also
include a circle of RealTrax® track (8 curved sections), a RealTrax®
lighted lock-on and wire harness set (for connecting the track to the
transformer) and a 50-watt Z-500 transformer and controller.
You’ll find complete instructions for choosing and setting up options in
the following pages. If you don’t read through the entire manual before
starting to operate your equipment, be sure to check the Quick Start
Basic Operating Instructions, which will give you the basics of the
operating system.
CAUTION - ELECTRICALLY OPERATED
PRODUCT:
Not recommended for children under ten years of age without adult
supervision. As with all electric products, precautions should be
observed during handling and use to reduce the risk of electric shock.
Transformer Ratings:
Input: 120 VAC
60 HZ Only
Output: 18VAC, 3A 54VA