Rail King F-3 Passenger Set Operating Instructions Manual - Railking
4
F-3 Passenger Train Set Operating Manual
RAILKING
Quick Start Operating Instructions
Track and Power
Although MTH Electric Trains manufactures its own track and
transformers, you can run your locomotive on 0-27 or wider-radius O
gauge track wired to draw power from any of the standard compatible
AC transformers listed in the chart on page 19. Be sure your track is in
good condition—clean and securely connected—to keep the locomotive
running and to prevent derailments. If you intend to utilize the
RiteTrax® track sections included in the set, see the directions below.
Setting Up the RiteTrax® Oval
Unlike other O Gauge track systems, each RiteTrax® track section
features a realistic built-in roadbed base, solid nickel-silver track rails and
realistic railroad ties all
designed to give the owner
an authentic looking track
system. In addition, each
RiteTrax® track section
employs the use of quick-
connect connectors instead
of track pins or railjoiners to
assemble the track sections
to one another. The quick
connectors and built-in base
allow RiteTrax® track
sections to be setup
anywhere, including some
carpeted surfaces without the need for track nails or the worry of carpet
stains.
You can set up literally hundreds of
different track designs utilizing
RiteTrax® components. We’ve
included just a few later in this
manual for your reference. Each
layout specifies the space required
and the components needed to
Align Quick Connect
Plugs and Gently Push
RiteTrax® Sections Together
Figure 1: Preparing to snap RiteTrax® sections together by
aligning Quick Connect Connectors together.
Figure 2: RiteTrax® sections in proper connected
position.