Rail King Fire Station User Manual - page 3
Final Touches: To protect some of the trim from breaking during transit, M.T.H.
has packaged it separately, in a small plastic bag. To complete set up, insert the
silver siren into the hole on the top of the fire house and insert the chrome
plated light housing into the small holes at the back of the fire truck. You may
choose to set up the Dalmatian and fire hydrant wherever you want or not use it
at all.
Operating Instructions: Once the fire station is wired to receive a 14-20 volt
minimum power supply from the transformer and the transformer is turned on,
simply press the activation button to start the fire station sequence.
In order to get the fire truck into the fire house, you must press the activation
button to begin the cycle. Once the small tab that will carry the truck along its
track has exited the fire house and come to a stop, place the truck onto the tab.
When you play the return sequence, the truck will be taken into the fire house.
In the beginning sequence, the red warning lights above the garage door will
begin blinking. Then the door will open, as a light comes on and a fire fighter
slides down the pole in the front window. Next, you will hear the fire truck start
and see it pull out of the station. The truck will leave the bay completely before
making a right hand turn and coming to a complete stop. After the truck has
stopped, it will remain stationary until the operator pushes the activation button
to return it to the station.
When you press the activation button a second time, the truck will start up and
roll backward into the fire station bay. Once it is in the bay, the motor sound
will shut off and the bay door will close, concluding the operation.
You can stop the motion and sound at any time by turning the power off or by
pressing the transformer's "Direction" button. Once the power is returned, the
truck will return to its starting position without sound effects.
Chrome Plated Light Housing
Dalmatian
Hydrant
Siren