Rain Bird TI-DM200 Troubleshooting Manual - Voltage Check of Pump Relay
Other manuals for TI-DM200:
Operating Instructions
Manual is about: Digital Multimeter
of
12
Voltage Check of Pump Relay
1) At the controller, turn on the station or master valve (MV)
that controls the pump relay to be tested.
2) At the pump relay, expose a part of each of the two wires
coming out of the relay.
3) Touch a probe to each of the exposed wires.
4) Check the reading on your multimeter.
Acceptable range: 24-28 V (AC)
Rain Bird Corporation
970 West Sierra Madre Avenue
Azusa, CA 91702
www.rainbird.com
- 12 -
SET METER TO
200V (AC)
PROBE
CONNECTIONS
BLACK
COM
RED
V
RB.DM200.TGuide.mech 2/3/03 10:18 AM Page 12