Rainbow Technologies CLD54D User Manual - page 6
⑦ Camera Mount
For mounting the camera to standard 1/4-20 mounts
This mount can be mounted on the top or bottom of the camera.
To install this on the top of the camera, remove the "PASSED" label
first and move the mount from the bottom of the camera.
⑧ Backfocus Adjustment Screw
This screw is for performing backfocus of the lens and camera.
Adjust if the lens focus is not providing a clear picture.
⑨ C-MOUNT ADAPTER RING
When using CS-mount lens (Flange back = 12.5mm), remove
this C-mount adapter ring.
This adapter ring must be in place when using C-mount lenses.
⑩ Dust Camp
Remove this cap just before installing the lens.
Do not handle or leave the camera with this cap removed.
⑪ A
i i l
l
i
i h
⑪ Auto iris lens selection switch.
DC for lenses without internal amp. Camera will control the iris.
VIDEO for lenses with internal amp. Lens will control its own iris.
⑫ Auto Iris Lens Connector
This connector is for DC drive or Video drive lens.
It supplies the control signals to auto iris lens.