Raisecom ISCOM2852 User Manual - page 11
www.raisecom.com
User Manual
6
Indicator Color Status
Description
ON
The corresponding port is in Link Up status.
Flickering
The corresponding port is transmitting or
receiving data.
LNK/ACT Green
OFF
The corresponding port is in Link Down
status.
ON
The corresponding port is working at the rate
of 100M in Link Up status.
100M Green
OFF
The corresponding port is working at the rate
of 10M in Link Up status.
⑤
The 4 1000BASE-X SFP Ethernet interface
⑥
The 4 indicators for the 4 1000BASE-X SFP Ethernet interfaces. 1 indicator for each interface:
LNK/ACT.
Indicator Color Status
Description
ON
The port is in Link Up status.
Flickering
The port is transmitting or receiving data.
LNK/ACT Green
OFF
The port is in Link Down status.
⑦
The CONSOLE interface.
3.2 Device rear panel description
ISCOM2852 can provide a socket for 220V AC power supply or a socket for -48V DC power supply
on its rear panel (see the figure below). Users can choose either of them according to need.
1)
The socket for 220V AC power supply
When ISCOM2852 adopting 220V AC power supply, the position of the power supply socket on the
device’s rear panel is shown in the figure below.
1
2
3
In the figure shown above: