Summary of ISCOM2926
Page 1
Www.Raisecom.Com iscom2926 hardware installation user manual.
Page 2: Legal Notices
Legal notices raisecom technology co., ltd makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Raisecom technology co., ltd shall not be held liable for errors contained herein or dir...
Page 3: Contact Information
Contact information technical assistance center the raisecom tac is available to all customers who need technical assistance with a raisecom product, technology, or, solution. You can communicate with us through the following methods: address: 2 nd floor, south building of rainbow plaza, no.11 shang...
Page 4: Contents
Contents general safety instructions ------------------------------------------------------------------------------ 1 chapter 1 overview ------------------------------------------------------------------------------------- 3 1.1 overview of this manual -----------------------------------------------...
Page 5: General Safety Instructions
Www.Raisecom.Com user manual 1 general safety instructions the following instructions serve as a general guide for the safe installation and operation of telecommunications products. Additional instructions, if applicable, are included inside the manual. Safety symbols this symbol may appear on the ...
Page 6
Www.Raisecom.Com user manual 2 be present inside certain products even when the power switch (if installed) is in the off position or a fuse is blown. For dc-powered products, although the voltages levels are usually not hazardous, energy hazards may still exist. Before working on equipment connecte...
Page 7: Chapter 1 Overview
Www.Raisecom.Com user manual 3 chapter 1 overview 1.1 overview of this manual this manual mainly discusses the installation of iscom2926 switch. It describes the features of the switch, introduces its components and the functions these components accomplish. The manual brings forth a normative insta...
Page 8
Www.Raisecom.Com user manual 4 chapter 2 specification and dimension 2.1 device hardware description iscom2926 ethernet switch is a layer-2 ethernet switch designed for network users’ access to the carriers’ network. Iscom2926 provides 24 10/100base-tx ethernet electrical interfaces and 2 1000base-x...
Page 9
Www.Raisecom.Com user manual 5 chapter 3 device appearance 3.1 device front panel description 24 10/100m ethernet interfaces in the form of rj-45, 1 console interface, 2 sfp interfaces and dozens of status indicators are placed on the front panel of iscom2926 switch (see the figure below). In the fi...
Page 10
Www.Raisecom.Com user manual 6 off the corresponding port is in link down status. On in link up status, the electrical interface is working at the rate of 100mbps. 100m green off in link up status, the electrical interface is working at the rate of 10mbps. ⑤ 2 1000base-x ethernet interfaces in the f...
Page 11
Www.Raisecom.Com user manual 7 3 in the figure shown above: ① the place where the socket for -48v dc power supply locates. Pgnd is the chassis ground. The -48 and bgnd are the -48v dc power supply. ② the place where the switch for -48v dc power supply locates. ③ the place where the grounding termina...
Page 12
Www.Raisecom.Com user manual 8 chapter 4 installation and application 4.1 device model the device models currently provided are: product model description iscom2926-ac layer-2 switch; 24 10/100base-tx ethernet interfaces in the form of rj-45 and 2 1000m ethernet interfaces in the form of sfp; 100~22...
Page 13
Www.Raisecom.Com user manual 9 rj-45 connector rj-45 jack the corresponding pin function definition of iscom2926 console interface is shown in the table below: pin number function type 3 rxd in 6 txd out 4, 5 gnd ground 1, 2, 7, 8 n.C. No connection 2) pc serial port signal definition the pin number...
Page 14
Www.Raisecom.Com user manual 10 rxd txd gnd rxd txd gnd pc serial pot iscom2926 console 3 2 5 6 3 4、5 the values of the connecting parameters of the terminal simulation program on the pc are as follows: 9 baud rate: 9600 9 data bit: 8 9 stop bit: 1 9 parity bit: none 9 flow control: none 4.3.2 conne...
Page 15
Www.Raisecom.Com user manual 11 note that there is a switch for the 100~220v ac power supply on iscom2926. After connecting iscom2926 to 100~220v ac power supply, please turn on the switch to begin the electrifying of the device. 2) iscom2926-dc adopts -48v dc power supply. Please connect the socket...
Page 16
Www.Raisecom.Com user manual 12 1 1 side 1 3 5 7 4 6 2 8 3 5 7 4 6 2 8 side 2 side 1 side 2 1 = white/orange 2 = orange 3 = white/green 4 = blue 5 = white/blue 6 = green 7 = white/brown 8 = brown 1 = white/green 2 = green 3 = white/orange 4 = white/brown 5 = brown 6 = orange 7 = blue 8 = white/blue ...
Page 17: Chapter 5 Notes
Www.Raisecom.Com user manual 13 chapter 5 notes the installation, maintenance, plugging in and pulling out of components of iscom2926 switch can only be conducted by qualified technical support staff. Please place the device in a temperature-controllable and humidity-controllable room and please be ...
Page 18
Address: 2 nd floor, south building of rainbow plaza, no.11 shangdi information road, haidian district, beijing postcode: 100085 tel: +86-10-82883305 fax: +86-10-82883056 email: export@raisecom.Com http://www.Raisecom.Com.