Raisecom ISCOM2926 User Manual - page 9
www.raisecom.com
User Manual
5
Chapter 3 Device Appearance
3.1 Device front panel description
24 10/100M Ethernet interfaces in the form of RJ-45, 1 CONSOLE interface, 2 SFP interfaces and
dozens of status indicators are placed on the front panel of ISCOM2926 switch (see the figure
below).
In the figure shown above:
① The logo and model of the switch are RAISECOM and 2926 respectively.
② 2 device status indicators: SYS and PWR.
Indicator Color Status Description
Flickering
The system is operating in order.
SYS Green
Other
Status
The system is initializing or software fault
occurs.
ON
The power supply module is electrified.
PWR Green
OFF
The power supply module is not electrified or
fault occurs at the power supply.
③ 24 10/100Mbps Ethernet interfaces
④ The status indicators for the 24 10/100Mbps Ethernet interfaces. There are 2 indicators for each
interface: LNK/ACT and 100M.
Indicator Color Status Definition
ON
The corresponding port is in Link Up status.
LNK/ACT Green
Flickering
The corresponding port is transmitting or
receiving data.
1
2
3
3
3
4
5
5
4
6
7