Raisecom RC315 User Manual - page 10
Raisecom Technology Co., Ltd.
6. Installation & Inspection
6.1. Matching Fiber-Optic Cable with Media Converter
RC315/316-FE-S1/2 series shall adopt single-mode single-strand fiber, and the
connector shall be SC/PC.
6.2. Types of Fiber-Optic Cable
Fiber-optic cable for multi-mode fiber port: 62.5/125um multi-mode fiber or 50/125um
multi-mode fiber.
Fiber-optic cable for single mode fiber port: 9/125um single mode fiber.
6.3. RJ45 Interface
Cat.5 of twisted-pair shall be used. Please note that twisted-pair cables shall not be
longer than 100 meters. For connection configuration, please see Chapter 2, Connection
with Other Equipment (at RJ45 Port).
6.4. Installation of Chassis (for RC316)
The chassis can be fixed onto 19” rack. The fixing accessories of chassis are in the
accessory box. If fixing the chassis with the rear hole, there’ll be 3cm space between the
front edge of chassis and the front edge of the rack; if fixing with the front hole, the front
edges will be in the same vertical level.
19" Standard Chassis Frame
9