RAM 2.4 Operation Manual - page 4
The RAM
®
DQX Series Power Amps
have been developped to meet the hig-
hest goals in the field of professional
power amplification. Their power, distor-
tion and dynamics figures place them
as reference in the industry.
The DQX Series incorporate unique
Absolute Protection Systems as the
CRO
™
, an immediate load disconnec-
tion system with an exclusive design
that excludes current in the output cir-
cuit relay, or the ICL
™
Clip-Limiter,
CSP
™
, ...
• Instantaneous High Flow QuantaPulse
Power Supply.
• Oversized Motorola
®
Output transis-
tors in the power modules.
• High Damping Factor.
• Unique Protection Systems: ICL
™
,
CSP
™
, CRO
™
...
• Full PC control via EtheRAM (DQX-E)
• Dual, Bridge or Parallel operation
switch on rear panel.
• Selectable Gain: 26, 32 or 38 dB,
(Default setting 32dB)
• 2 U Rugged Steel Chassis.
• 10 mm thick, extruded and machined
duraluminum front panel.
• Twin Neutrik
®
XLR Input Connectors.
• Dual Binding posts & Neutrik
®
Speakon Output Connectors.
• Unobtrusive Gripping Handles in the
front panel.
• Slow Start System with circuit relay
based speaker protection.
• Back to front twin cooling fans.
• Single independant fan on the power
supply.
• Electronic continuously variable fan
speed control.
• Usable voltage 170-245V (230V nomi-
nal) or 90-128V (120V nominal).
• 2 Ohms continuous operation.
1.2 Main Characteristics
1.1 Introduction
Die RAM
®
- Endstufen der DQX-serie
sind dazu entwickelt worden, um den
höchsten Anforderungen im professio-
nellen Audiobereich entgegenzukom-
men. Ihre Eigenschaften bezüglich der
Leistung, Verzerrung und Dynamik
machen au der DQX-serie ein
Referenzprodukt.
Die DQX-serie enthält einzigartige
Schutzschaltungen, wie z.B. ein anti-clip
system (ICL
®
) oder das automatische
stromlose Abkopplungssytem zum
Schutz der Lautsprecher am
Ausgangsrelais (CRO
®
).
• QuantaPulse-Stromversorgung mit
Sofortigem Hochstrom.
• Leistungsmodule mit überdimensio-
nierten Motorola
®
-Transistoren.
• Hoher Dämpfungsfaktor.
• Einzigartige Schutzschaltungen (ICL
™
,
CSP
™
, CRO
™
, u.a.)
• Komplette PC-Steuerung über
EtheRAM (DQX-E)
• Dual, Bridge and Parallel mode shal-
ter auf der Rückseite.
• Anwählbare Eingangspegelwerte
(Gain): 26, 32 oder 38 dB,
(Werkseinstellung: 32dB)
• Standardhöhe von zwei
Rackeinheiten.
• Die Frontplatte hat eine dicke von 10
mm, ist aus Duraluminium im
Sterangpressverfahren hergestellt und
wird im nachhein mechanisch bear-
beitet.
• Doppelte Neutrik
®
XLR - Stecker.
• Bananenstecker-Typ und Neutrik
Speakon Stecker.
• Gestufte Einschalttechnik mit
Relaisschutz für die Lautsprecher
(Softstart)
• Lüfter mit stufenlos geregelter
Geschwindigkeit. Luftaustritt vorne.
• Die Stromversorgung verfügt über
einen einzigen und unabhängigern
Lüfter.
• Elektronische Kontrolle der Lüfter.
• Voltage von 170-245V (230V nominal)
oder 90-128V (120V nominal).
• 2 Ohms Anwendung.
1.2 Allgemeine Eigenschaften
1.1 Einleitung
General Information
Les amplificateurs de puissance RAM
®
DQX Series satisfont aux plus hautes
exigences des professionnels de la
sonorisation. Leurs caractéristiques de
puissance, distorsion et réponse transi-
toire font des amplificateurs de puissan-
ce DQX, de véritables outils de référen-
ce faisant rimer qualité de fabrication
avec pureté du son.
Les séries DQX sont dotées de plu-
sieurs systèmes de protection électroni-
ques brevetés, à l’instar du système
anti-clipping aservi (ICL
®
) sans influen-
ce sur l’écoute, du système de conne-
xion / déconnexion sécurisé pour les
HP, par absence de courant aux relais
(CRO
®
), ou de la tenue des court-
circuits permanents à pleine charge par
temporisation (CSP
®
).
• Grande capacité en courant instanta-
né QuantaPulse.
• Modules de puissance munis de tran-
sistors Motorola
®
amplement dimen-
sionnés.
• Très haut facteur d’amortissement.
• Protections de l’electronique et des
HP brevetées: ICL
™
, CSP
™
, CRO
™
...
• Controlle de toutes les fonctions via
EtheRAM (DQX-E)
• Conmutateur de mise en mode
Bridge, Dual ou Parallèle sur le pan-
neau arrière.
• Trois niveaux de sensibilité au choix:
26, 32 ou 38dB, (réglage usine 32dB)
• Châssis extrêmement robuste, en
fonte d’acier.
• Panneau avant en dural, extrudé et
fraisé de 10 mm, 2U standard, 19
pouces.
• Connecteurs d’entrée type XLR
Neutrik
®
doublés (entrée-sortie).
• Bornes de Sortie doublées TP-6 et
Neutrik
®
Speakon.
• Temporisation à la mise sous tension.
• Refroidissement assuré par ventilation
forcée de l’arrière vers l’avant.
• Vitesse des ventilateurs asservie en
fonction de la température interne.
• Voltage de fontionement 170-245V
(230V nominal) ou 90-128V (120V
nominal).
• Fontionnement à 2 Ohms continu.
1.2 Caractéristiques Générales
1.1 Introduction
Informations
Générales
Allgemeine
Anweisungen
3