1. DL manuals
  2. RAM
  3. Automobile
  4. promaster city 2017
  5. Owner's Manual

RAM promaster city 2017 Owner's Manual

Other manuals for promaster city 2017: User Manual

Summary of promaster city 2017

  • Page 1

    2017 promaster cit y* stick with the specialists ® third edition printed in u.S.A. ©2016 fca us llc. All rights reserved. Ram is a registered trademark of fca us llc. 17vm-126-ac p r o m a s t e r c i t y o w n e r ’ s m a n u a l 2 0 1 7.

  • Page 2

    Vehicles sold in canada with respect to any vehicles sold in canada, the name fca us llc shall be deemed to be deleted and the name fca canada inc. Used in substitution therefore. Driving and alcohol drunken driving is one of the most frequent causes of accidents. Your driving ability can be serious...

  • Page 3: Table Of Contents

    Table of contents section page 1 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 things to know before starting your vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 5: Introduction

    Introduction contents 䡵 introduction . . . . . . . . . . . . . . . . . . . . . . . . .4 䡵 how to use this manual . . . . . . . . . . . . . . .4 䡵 warnings and cautions . . . . . . . . . . . . . . . .6 䡵 van conversions/campers . . . . . . . . . . . . . .6 䡵 vehicle identification number . . . . . . ...

  • Page 6

    Introduction congratulations on selecting your new fca us llc ve- hicle. Be assured that it represents precision workmanship, distinctive styling, and high quality. This owner’s manual has been prepared with the assis- tance of service and engineering specialists to acquaint you with the operation a...

  • Page 7

    1 introduction 5.

  • Page 8

    Warnings and cautions this owner’s manual contains warnings against oper- ating procedures that could result in a collision, bodily injury and/or death. It also contains cautions against procedures that could result in damage to your vehicle. If you do not read this entire owner’s manual, you may mi...

  • Page 9

    Vehicle identification number the vehicle identification number (vin) is found on the left front corner of the instrument panel, visible through the windshield. This number also appears on the vehicle frame and underbody as well as the automobile informa- tion disclosure label affixed to a window on...

  • Page 11: Contents

    Things to know before starting your vehicle contents 䡵 a word about your keys . . . . . . . . . . . . . . .11 ▫ ignition key removal . . . . . . . . . . . . . . . . . . . .11 ▫ locking doors with a key . . . . . . . . . . . . . . . .12 ▫ key-in-ignition reminder . . . . . . . . . . . . . . . . .12 䡵...

  • Page 12

    䡵 windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 ▫ power windows — if equipped . . . . . . . . . . . . .21 ▫ wind buffeting . . . . . . . . . . . . . . . . . . . . . . . . .23 䡵 sliding side door . . . . . . . . . . . . . . . . . . . . .24 ▫ opening and closing from outside the ...

  • Page 13

    A word about your keys the key fob contains the remote keyless entry (rke) key fob with an integrated key. To use the mechanical key, simply push the mechanical key release button. To order duplicate keys, please contact the authorized dealer. Ignition key removal 1. Place the gear selector in park....

  • Page 14

    Warning! • before exiting a vehicle, always shift the transmis- sion into park, apply the parking brake, and re- move the key fob from the vehicle. When leaving the vehicle, always lock your vehicle. In case you switch off the vehicle and the transmission is not in park position, a warning message w...

  • Page 15

    Sentry key the sentry key immobilizer system prevents unauthor- ized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regardless of whether the vehicle is locked or unlocked. The system uses ignition keys which have an embedded ele...

  • Page 16

    General information the following regulatory statement applies to all radio frequency (rf) devices equipped in this vehicle: this device complies with part 15 of the fcc rules and with industry canada license-exempt rss standard(s). Operation is subject to the following two conditions: 1. This devic...

  • Page 17

    Described arming sequences has occurred, the vehicle security alarm will arm regardless of whether you are in the vehicle or not. If you remain in the vehicle and open a door, the alarm will sound. If this occurs, disarm the vehicle security alarm. Security system manual override the vehicle securit...

  • Page 18

    Button on key fob to unlock the cargo area (side lateral sliding doors and rear doors). The turn signal lights will flash to acknowledge the unlock signal. Cargo vehicle (united states) — if equipped push and release the unlock button on key fob to unlock all doors. Push and release the cargo unlock...

  • Page 19

    3. Take out the battery case. Remove and replace the battery observing its polarity. 4. Refit the battery case inside the key fob and turn the screw to lock it into place. General information the following regulatory statement applies to all radio frequency (rf) devices equipped in this vehicle: thi...

  • Page 20

    Locking the doors from the outside locking with a key fob push and release the lock button on the key fob to lock all doors. The turn signal lights will flash and the horn will chirp to acknowledge the signal. Locking with the key blade push the key blade release button to expose the key blade, inse...

  • Page 21

    Unlock the doors from the outside unlocking with a key fob for all passenger vans and us cargo vans (if equipped) to unlock all the doors, push and release the unlock button on the key fob. The turn signal lights will flash to acknowl- edge the unlock signal. Push and release the cargo unlock button...

  • Page 22

    Closing and locking from outside grab the side door handle and push towards the front of the vehicle. Once the side door is secured in the full closed position, reverse either of the unlocking modes above to lock the sliding side doors. Child lock system — if equipped this system prevents the slidin...

  • Page 23

    Auto unlock doors this feature unlocks all doors when the driver door is open. Note: if the passenger door is open, only the passenger door is unlocked. This procedure is the same for the rear and side doors as well. Windows power windows — if equipped the control on the left front door panel has up...

  • Page 24

    The window opening mechanism is fitted with a security system (if equipped) that can detect the presence of an obstacle whilst the window is closing; when this happens, the system activates and the movement of the glass is immediately reversed. If the presence of an object is detected and the system...

  • Page 25

    Warning! There is no anti-pinch protection when the window is almost closed. Be sure to clear all objects from the window before closing. Power windows system initialization the power windows may be reset if any of the following occurs: • on the front doors • fuse or battery are disconnected when th...

  • Page 26

    Sliding side door on cargo versions, the sliding side door is fitted with a spring-loaded latch that stops the door from opening any further. To lock it, simply push the door as far as it will go; to unlock it, pull forward firmly. Opening and closing from outside the vehicle opening/unlocking with ...

  • Page 27

    Closing: pull the interior door handle switch to release the door and then push it towards the front of the vehicle. Child lock system this system prevents the sliding side doors being opened from the inside. The child locks can only be engaged/disengaged with the sliding side door open: the device ...

  • Page 28

    Using the key fob on the door, you can do the following: • for cargo versions with swing door/cargo doors: cen- trally unlock the load compartment (sliding side doors + rear swing doors/tailgate), centrally lock all the doors. • for versions with swing door: local unlocking/locking. Opening/closing ...

  • Page 29

    3. Children that are not big enough to wear the vehicle seat belt properly (refer to “child restraints” in this section for further information) should be secured in a vehicle with a rear seat in child restraints or belt-positioning booster seats. Older children who do not use child restraints or be...

  • Page 30

    Risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Enhanced seat belt use reminder system (beltalert) driver and passenger beltalert — if equipped beltalert is a feature intended to remind the driver and outboard front seat passeng...

  • Page 31

    The outboard front passenger seat beltalert is not active when the outboard front passenger seat is unoccupied. Beltalert may be triggered when an animal or other items are placed on the outboard front passenger seat or when the seat is folded flat (if equipped). It is recommended that pets be restr...

  • Page 32

    Warning! (continued) driver, should always wear their seat belts whether or not an air bag is also provided at their seating position to minimize the risk of severe injury or death in the event of a crash. • wearing your seat belt incorrectly could make your injuries in a collision much worse. You m...

  • Page 33

    Warning! (continued) • a shoulder belt placed behind you will not protect you from injury during a collision. You are more likely to hit your head in a collision if you do not wear your shoulder belt. The lap and shoulder belt are meant to be used together. • a frayed or torn seat belt could rip apa...

  • Page 34

    4. Position the lap belt so that it is snug and lies low across your hips, below your abdomen. To remove slack in the lap belt portion, pull up on the shoulder belt. To loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug seat belt reduces the risk of sliding...

  • Page 35

    Lap/shoulder belt untwisting procedure use the following procedure to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 inches (15 to 30 cm) above the latch plate, grasp and twist the seat belt webbing 180 degrees to creat...

  • Page 36

    As a guide, if you are shorter than average, you will prefer the shoulder belt anchorage in a lower position, and if you are taller than average, you will prefer the shoulder belt anchorage in a higher position. After you release the anchorage button, try to move it up or down to make sure that it i...

  • Page 37

    Seat belts and pregnant women seat belts must be worn by all occupants including preg- nant women: the risk of injury in the event of an accident is reduced for the mother and the unborn child if they are wearing a seat belt. Position the lap belt snug and low below the abdomen and across the strong...

  • Page 38

    Switchable automatic locking retractor (alr) commercial vehicle the seat belt in the passenger seating position is equipped with a switchable automatic locking retractor (alr) which is used to secure a child restraint system. For additional information, refer to “installing child restraints using th...

  • Page 39

    If the passenger seating position is equipped with an alr and is being used for normal usage, only pull the seat belt webbing out far enough to comfortably wrap around the occupant’s mid-section so as to not activate the alr. If the alr is activated, you will hear a clicking sound as the seat belt r...

  • Page 40

    Warning! • the seat belt assembly must be replaced if the switchable automatic locking retractor (alr) fea- ture or any other seat belt function is not working properly when checked according to the procedures in the service manual. • failure to replace the seat belt assembly could in- crease the ri...

  • Page 41

    Air bag warning light the orc monitors the readiness of the electronic parts of the air bag system whenever the ignition switch is in the avv/start or mar/acc/ on/run position. If the ignition switch is in the stop/off/lock position or in the acc position, the air bag system is not on and the air ba...

  • Page 42

    Warning! (continued) as a bulb check when the ignition is first turned on, stays on after you start the vehicle, or if it comes on as you drive, have an authorized dealer service the air bag system immediately. Front air bags this vehicle has front air bags and lap/shoulder belts for both the driver...

  • Page 43

    Warning! • being too close to the steering wheel or instrument panel during front air bag deployment could cause serious injury, including death. Air bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel. • never place a rear-facing chil...

  • Page 44

    Warning! (continued) • relying on the air bags alone could lead to more severe injuries in a collision. The air bags work with your seat belt to restrain you properly. In some collisions, air bags won’t deploy at all. Always wear your seat belts even though you have air bags. Front air bag operation...

  • Page 45

    Warning! (continued) • do not mount any accessories to the knee impact bolsters such as alarm lights, stereos, citizen band radios, etc. Supplemental driver knee air bag this vehicle is equipped with a supplemental driver knee air bag mounted in the instrument panel below the steering column. The su...

  • Page 46

    Warning! Do not use accessory seat covers or place objects between you and the side air bags; the performance could be adversely affected and/or objects could be pushed into you, causing serious injury. 2. Supplemental side air bag inflatable curtains (sabics): located above the side windows. The tr...

  • Page 47

    Warning! (continued) require permanent attachments (bolts or screws) for installation on the vehicle roof. Do not drill into the roof of the vehicle for any reason. The sabics and sabs (side air bags) are designed to activate in certain side impacts. The occupant restraint controller (orc) determine...

  • Page 48

    Warning! • side air bags need room to inflate. Do not lean against the door or window. Sit upright in the center of the seat. • being too close to the side air bags during deploy- ment could cause you to be severely injured or killed. • relying on the side air bags alone could lead to more severe in...

  • Page 49

    • as the air bags deflate, you may see some smoke-like particles. The particles are a normal by-product of the process that generates the non-toxic gas used for air bag inflation. These airborne particles may irritate the skin, eyes, nose, or throat. If you have skin or eye irritation, rinse the are...

  • Page 50

    Enhanced accident response system reset procedure in order to reset the enhanced accident response system functions after an event, the ignition switch must be changed from ignition start or on/run to ignition off. Carefully check the vehicle for fuel leaks in the engine compartment and on the groun...

  • Page 51

    And safety systems for a short period of time, typically 30 seconds or less. The edr in this vehicle is designed to record such data as: • how various systems in your vehicle were operating; • whether or not the driver and passenger safety belts were buckled/fastened; • how far (if at all) the drive...

  • Page 52

    There are different sizes and types of restraints for children from newborn size to the child almost large enough for an adult safety belt. Always check the child seat owner’s manual to make sure you have the correct seat for your child. Carefully read and follow all the instructions and warnings in...

  • Page 53

    Summary of recommendations for restraining children in vehicles child size, height, weight or age recommended type of child restraint infants and toddlers children who are two years old or younger and who have not reached the height or weight limits of their child restraint either an infant carrier ...

  • Page 54

    Infant and child restraints safety experts recommend that children ride rear-facing in the vehicle until they are two years old or until they reach either the height or weight limit of their rear-facing child restraint. Two types of child restraints can be used rear- facing: infant carriers and conv...

  • Page 55

    Cushion while the child’s back is against the seatback, they should use a belt-positioning booster seat. The child and belt-positioning booster seat are held in the vehicle by the seat belt. Warning! • improper installation can lead to failure of an infant or child restraint. It could come loose in ...

  • Page 56

    If the answer to any of these questions was “no,” then the child still needs to use a booster seat in this vehicle. If the child is using the lap/shoulder belt, check seat belt fit periodically and make sure the seat belt buckle is latched. A child’s squirming or slouching can move the belt out of p...

  • Page 57

    Lower anchors and tethers for children (latch) restraint system your vehicle is equipped with the child restraint anchorage system called latch, which stands for lower anchors and tethers for children. The latch system has three vehicle anchor points for installing latch-equipped child seats. There ...

  • Page 58

    Frequently asked questions about installing child restraints with latch what is the weight limit (child’s weight + weight of the child re- straint) for using the latch anchor- age system to attach the child restraint? 65 lbs (29.5 kg) use the latch anchorage system until the combined weight of the c...

  • Page 59

    Frequently asked questions about installing child restraints with latch can the rear-facing child restraint touch the back of the front passenger seat? Yes the child seat may touch the back of the front passenger seat if the child restraint manufacturer also allows contact. See your child restraint ...

  • Page 60

    Locating tether anchorages there are tether strap anchorages behind each rear seating position located on the back of the seat. Latch-compatible child restraint systems will be equipped with a rigid bar or a flexible strap on each side. Each will have a hook or connector to attach to the lower ancho...

  • Page 61

    To install a latch-compatible child restraint if the selected seating position has a switchable automatic locking retractor (alr) seat belt, stow the seat belt, following the instructions below. See the section “installing child restraints using the vehicle seat belt” to check what type of seat belt...

  • Page 62

    Path and then buckle it. Do not lock the seat belt. Remind all children in the vehicle that the seat belts are not toys and that they should not play with them. Warning! • improper installation of a child restraint to the latch anchorages can lead to failure of the re- straint. The child could be ba...

  • Page 63

    Lap/shoulder belt systems for installing child restraints in this vehicle passenger vehicle automatic locking retractor (alr) locations 2 things to know before starting your vehicle 61.

  • Page 64

    Frequently asked questions about installing child restraints with seat belts what is the weight limit (child’s weight + weight of the child re- straint) for using the tether anchor with the seat belt to attach a forward facing child restraint? Weight limit of the child restraint always use the tethe...

  • Page 65

    Installing a child restraint with a switchable automatic locking retractor (alr): child restraint systems are designed to be secured in vehicle seats by lap belts or the lap belt portion of a lap/shoulder belt. Warning! • improper installation or failure to properly secure a child restraint can lead...

  • Page 66

    8. If the child restraint has a top tether strap and the seating position has a top tether anchorage, connect the tether strap to the anchorage and tighten the tether strap. See the section “installing child restraints using the top tether anchorage” for directions to attach a tether anchor. 9. Test...

  • Page 67

    1. Look behind the seating position where you plan to install the child restraint to find the tether anchorage. You may need to move the seat forward to provide better access to the tether anchorage. If there is no top tether anchorage for that seating position, move the child restraint to another p...

  • Page 68

    Installing child restraints in commercial vehicles this commercial vehicle is not designed for use as a family vehicle and is not intended for carrying children in the front passenger seat(s). Never install rear-facing child restraints in this vehicle. Although the seat belt can be locked to secure ...

  • Page 69

    Lap/shoulder belt systems for installing child restraints in this vehicle installing a child restraint with a switchable automatic locking retractor (alr): child restraint systems are designed to be secured in vehicle seats by lap belts or the lap belt portion of a lap/shoulder belt. Warning! • impr...

  • Page 70

    5. To lock the seat belt, pull down on the shoulder part of the belt until you have pulled all the seat belt webbing out of the retractor. Then, allow the webbing to retract back into the retractor. As the webbing retracts, you will hear a clicking sound. This means the seat belt is now in the autom...

  • Page 71

    4. Remove slack in the tether strap according to the child restraint manufacturer’s instructions. Warning! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchorage position directly behind the child seat to secure a child restr...

  • Page 72

    Under which vehicle operations will occur. For the recom- mended viscosity and quality grades, refer to “mainte- nance procedures” in “maintaining your vehicle.” caution! Never use non-detergent oil or straight mineral oil in the engine or damage may result. Note: a new engine may consume some oil d...

  • Page 73

    Warning! (continued) • if you are required to drive with the trunk/liftgate/ rear doors open, make sure that all windows are closed and the climate control blower switch is set at high speed. Do not use the recirculation mode. • if it is necessary to sit in a parked vehicle with the engine running, ...

  • Page 74

    Defroster check operation by selecting the defrost mode and place the blower control on high speed. You should be able to feel the air directed against the windshield. See your authorized dealer for service if your defroster is inoper- able. Floor mat safety information always use floor mats designe...

  • Page 75

    Warning! (continued) • only use the passenger’s side floor mat on the passenger’s side floor area. • always make sure objects cannot fall or slide into the driver’s side floor area when the vehicle is moving. Objects can become trapped under accelera- tor, brake, or clutch pedals and could cause a l...

  • Page 77: Contents

    Understanding the features of your vehicle contents 䡵 mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78 ▫ inside day/night mirror — if equipped . . . . . .78 ▫ outside mirrors . . . . . . . . . . . . . . . . . . . . . . . .79 ▫ manual folding door mirrors . . . . . . . . . . . . ...

  • Page 78

    ▫ cargo vehicle interior lamps . . . . . . . . . . . . . . .94 ▫ passenger vehicle interior lamps . . . . . . . . . . . .95 䡵 windshield wipers and washers . . . . . . . .96 ▫ front windshield wiper operation . . . . . . . . . . .96 ▫ rear window wiper/washer . . . . . . . . . . . . . . .97 䡵 tilt/t...

  • Page 79

    䡵 cupholders . . . . . . . . . . . . . . . . . . . . . . . . . .111 䡵 storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111 ▫ glove compartment . . . . . . . . . . . . . . . . . . . . .111 ▫ dash storage . . . . . . . . . . . . . . . . . . . . . . . . .112 ▫ overhead console storage ....

  • Page 80

    Mirrors inside day/night mirror — if equipped a single ball joint mirror is provided in the vehicle. It is a twist on mirror that has a fixed position at the windshield. The mirror head can be adjusted up, down, left, and right for various drivers. The mirror should be adjusted to center on the view...

  • Page 81

    Outside mirrors to receive maximum benefit, adjust the outside mirrors to center on the adjacent lane of traffic with a slight overlap of the view obtained on the inside mirror. Warning! Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they ...

  • Page 82

    Manual outside mirror adjustment — if equipped from the inside of the vehicle, use the control lever to adjust the mirror. Power outside mirrors — if equipped the power mirror controls are located on the mirror flag trim above the driver’s door trim panel. To adjust a mirror, turn the control knob t...

  • Page 83

    Sun visors the driver and passenger sun visors are located on the headliner, near the front windshield. The sun visor can be rotated downward or up against the door glass. Your vehicle may be equipped with courtesy mirror located on the passenger sun visor. “slide-on-rod” of sun visor to use the “sl...

  • Page 84

    Manual seat adjustments the front driver and passenger seats can be adjusted forward and rearward, and if equipped, may be reclined and the height and lumbar can be adjusted. Warning! • adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which...

  • Page 85

    Forward and rearward adjustment the adjustment bar is at the front of the seat, near the floor. Pull the bar upward to move the seat forward or rearward. Release the bar once the seat is in the desired position. Then, using body pressure, move forward and rearward on the seat to be sure that the sea...

  • Page 86

    Folding rear seat — if equipped to provide additional storage area, each rear seat can be folded flat to allow for extended cargo space. 1. Locate the release lever (upper outboard side of seat), and lift it upward until the seatback releases. 2. Slowly fold down the seatback. 3. Pull forward on the...

  • Page 87

    4. Reverse order for original setting. Heated seats — if equipped on some models, the front driver and passenger seats may be equipped with heaters in both the seat cushions and seatbacks. The controls for the front heated seats are located on the lower outboard side of the seat. Push the switch onc...

  • Page 88

    Warning! • persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaus- tion or other physical condition must exercise care when using the seat heater. It may cause burns even at low temperatures, especially ...

  • Page 89

    Warning! • a loose head restraint thrown forward in a collision or hard stop could cause serious injury or death to occupants of the vehicle. Always securely stow re- moved head restraints in a location outside the occupant compartment. (continued) warning! (continued) • all the head restraints must...

  • Page 90

    The center head restraint is adjustable and removable. To raise the head restraint, push and hold the adjustment button, located on the base of the head restraint and pull upward on the head restraint. To lower the head restraint, push and hold the adjustment button, and push downward on the head re...

  • Page 91

    To open and close the hood to open the hood, two latches must be released. 1. Pull the release lever located below the instrument panel and in front of the driver’s door. 2. Move to the outside of the vehicle, reach into the opening beneath the center of the hood and push up the safety latch lever t...

  • Page 92

    3. Raise the hood and place the hood prop rod in hood slot to secure the hood in the open position. Caution! Be sure to disengage the rod and secure it in close position before closing the hood. Damage may occur. Warning! Be sure the hood is fully latched before driving your vehicle. If the hood is ...

  • Page 93

    Lights multifunction lever the multifunction lever, located on the left side of the steering wheel, controls the operation of the headlights, high beams, parking lights, passing light and turn signals. Note: the external lights can only be turned on with the ignition in the on/run position. Headligh...

  • Page 94

    High beams with the low beams activated, pull the multifunc- tion lever towards the steering wheel to turn on the high beams. A high beam symbol will illuminate in the cluster to indicate the high beams are on. Pull the multi- function lever a second time to switch the headlights back to low beam. F...

  • Page 95

    Front fog lights — if equipped the fog light switch is located on the center stack of the instrument panel, just below the radio. Push the switch once to turn the front fog lights on. Push the switch a second time to turn the front fog lights off. Map/dome/lights these lights are mounted between the...

  • Page 96

    Cargo vehicle interior lamps lateral roof light this is located on the right side of the load compartment. Rear roof light this is located on the rear panel of the load compartment. In auto-mode the light comes on automatically when you open the sliding doors and the rear wing doors and goes out whe...

  • Page 97

    Passenger vehicle interior lamps the interior lamps are located in the center of the roof, above the second row seating and in the roof in the center of the rear load area. Second row seating and rear roof lights operation in auto-mode, the light comes on automatically when you open the sliding door...

  • Page 98

    Windshield wipers and washers the windshield wiper/washer lever is located on the right side of the steering column. Note: the windshield wipers/washers will only operate with the ignition in the on/run position. Front windshield wiper operation there are five different modes of operation for the fr...

  • Page 99

    Front windshield washer operation pull the windshield wiper/washer lever toward the steer- ing wheel to activate the washers. The wipers will activate automatically for three cycles after the lever is released. Caution! • turn the windshield wipers off when driving through an automatic car wash. Dam...

  • Page 100

    Tilt/telescoping steering column this feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the steering column. The tilt/telescoping control handle is located on the steering column, below the turn signal lever. To unlock the steering column, p...

  • Page 101

    Note: in order to ensure proper operation, the speed control system has been designed to shut down if multiple speed control functions are operated at the same time. If this occurs, the speed control system can be reactivated by pushing the on/off button and resetting the desired vehicle set speed. ...

  • Page 102

    To resume speed to resume a previously set speed, push the res (+) button and release. Resume can be used at any speed above 20 mph (32 km/h) up to the maximum speed of 100 mph (160 km/h). To vary the speed setting to increase speed when the speed control is set, you can increase speed by pushing th...

  • Page 103

    Metric speed (km/h) • pushing the set (-) button once will result in a 1 km/h decrease in set speed. Each subsequent tap of the button results in a decrease of 1 km/h. • if the button is continually pushed, the set speed will continue to decrease until the button is released, then the new set speed ...

  • Page 104

    Interaction with trailer towing the parksense system is automatically deactivated when a trailer equipped by mopar is hitched to the vehicle. The system will be automatically activated as soon as the trailer is removed. If it does not happen, turning the key ignition switch to off and then to on aga...

  • Page 105

    Parksense rear park assist alerts if an obstacle is behind the vehicle when reverse gear is engaged, an audible alert is activated. The tones emitted by the loudspeaker inform the driver that the vehicle is approaching an obstacle. The pauses between the tones are directly proportional to the distan...

  • Page 106

    Audible and visual signals supplied by the park assist system signal meaning indication obstacle distance an obstacle is present within the sensors’ field of view audible signal (dashboard loud- speaker) • sound pulses emitted at a rate that increases as the distance decreases. • emits continuous to...

  • Page 107

    Parksense rear park assist failure indications a malfunction of the parksense sensors or system is indicated, during reverse gear engagement, by the in- strument panel warning icon. The warning icon is illuminated and a message is displayed on the instrument cluster display (if equipped). Refer to “...

  • Page 108

    Obstacle behind the fascia/bumper, or it could provide a false indication that an obstacle is behind the fascia/ bumper. • objects such as bicycle carriers, etc., must not be placed within 12 inches (30 cm) from the rear fascia/bumper while driving the vehicle. Failure to do so can result in the sys...

  • Page 109

    If it’s necessary to keep the ball mount and hitch ball assembly mounted for a long period, it is possible to filter out the ball mount and hitch ball assembly presence in sensor field of view. The filtering operation must be performed only by an authorized dealer. Parkview rear back up camera — if ...

  • Page 110

    Warning! Drivers must be careful when backing up even when using the parkview rear back up camera. Always check carefully behind your vehicle, and be sure to check for pedestrians, animals, other vehicles, obstruc- tions, or blind spots before backing up. You are re- sponsible for the safety of your...

  • Page 111

    Load compartment power outlet the load compartment power outlet is located on the left side of the rear cargo compartment. It operates with the ignition key in the mar (acc/on/run) position. The outlet can be used for powering 12 volt adaptive accesso- ries and recharging communications devices. Cau...

  • Page 112

    Warning! To avoid serious injury or death: • only devices designed for use in this type of outlet should be inserted into any 12 volt outlet. • do not touch with wet hands. • close the lid when not in use and while driving the vehicle. • if this outlet is mishandled, it may cause an electric shock a...

  • Page 113

    Cupholders a cupholder is located in the front and rear of the center console. Storage glove compartment the glove compartment is located on the passenger side of the instrument panel. To open the glove compartment, pull the release handle. Note: the glove compartment handle is equipped with a lock....

  • Page 114

    Dash storage the dash storage is located on the right side of the instrument panel above the glove compartment. Overhead console storage there is additional shelf storage above the front sun visors. Dash storage overhead console storage location 112 understanding the features of your vehicle.

  • Page 115

    Cargo area features rear cargo tie-downs to make it easier to secure your load, there are hooks (if equipped) fixed to the floor. Note: power washing is not allowed inside the cargo area. Warning! • to help protect against personal injury, passengers should not be seated in the rear cargo area. The ...

  • Page 116

    Warning! (continued) • cargo tie-down hooks are not safe anchors for a child seat tether strap. In a sudden stop or accident, a hook could pull loose and allow the child seat to come loose. A child could be badly injured. Use only the anchors provided for child seat tethers. The weight and position ...

  • Page 117

    Cargo compartment light — if equipped the cargo compartment light comes on automatically when the swing doors are opened and turns off when the doors are closed. Rear window features rear window defroster — if equipped the rear window defroster button is located in the center of the instrument panel...

  • Page 118

    Roof luggage rack — if equipped the crossbars and siderails are designed to carry the weight on vehicles equipped with a luggage rack. The load must not exceed 150 lbs (68 kg), and should be uniformly distributed over the luggage rack crossbars. Note: if not equipped with crossbars, your authorized ...

  • Page 119

    Caution! • to prevent damage to the roof of your vehicle, do not carry any loads on the roof rack without the crossbars installed. The load should be secured and placed on top of the crossbars, not directly on the roof. If it is necessary to place the load on the roof, place a blanket or some other ...

  • Page 121: Contents

    Understanding your instrument panel contents 䡵 instrument panel features . . . . . . . . . . .121 䡵 instrument cluster . . . . . . . . . . . . . . . . . .122 ▫ instrument cluster . . . . . . . . . . . . . . . . . . . . .123 䡵 instrument cluster display . . . . . . . . . . .124 ▫ instrument cluster d...

  • Page 122

    䡵 uconnect 5.0 voice recognition quick tips — if equipped . . . . . . . . . . . . . .176 ▫ introducing uconnect . . . . . . . . . . . . . . . . . . . .176 ▫ get started . . . . . . . . . . . . . . . . . . . . . . . . . . .177 ▫ radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .178 ▫...

  • Page 123

    Instrument panel features 1 — air outlet 7 — upper dash storage 13 — climate controls 2 — multifunction lever (external lights) 8 — radio 14 — usb charger/aux 3 — instrument cluster 9 — passenger air bag 15 — driver air bag 4— horn 10 — lower dash storage 16 — uconnect phone buttons 5— electronic sp...

  • Page 124

    Instrument cluster instrument cluster 122 understanding your instrument panel.

  • Page 125

    Instrument cluster 1. Speedometer • indicates vehicle speed. 2. Fuel gauge • the pointer shows the level of fuel in the fuel tank when the ignition switch is in the on/run position. • the fuel pump arrow symbol points to the side of the vehicle where the fuel door is located. 3. Temperature gauge • ...

  • Page 126

    5. Instrument cluster display • when the appropriate conditions exist, this display shows the instrument cluster display messages. Refer to “instrument cluster display” in “understanding your instrument panel” for further information. Instrument cluster display your vehicle may be equipped with an i...

  • Page 127

    • language • buzzer volume • seat belt buzzer • service • daylights • exit menu the system allows the driver to select information by pushing the following buttons mounted on the instrument panel to the right of the steering column: • menu button push and release the menu button for a time longer th...

  • Page 128

    2. Push and release the up or down arrow button (by single pushes) to scroll through all the submenu options. 3. Briefly push and release the menu button to select the displayed submenu option and to open the relevant setup menu. 4. Push and release the up or down arrow button (by single pushes) to ...

  • Page 129

    Trip b data this function can be used to activate (on) or deactivate (off) the trip b display (partial trip). Refer to ⬙trip computer⬙ in this section for further infor- mation. To switch the function on/off: 1. Push the menu button briefly. The display will flash on or off according to the previous...

  • Page 130

    2. When you have made the required settings, push the menu button briefly to go back to the submenu screen or hold the button down to go back to the main menu screen without saving. 3. Hold the menu button down again to return to the standard screen or to the main menu according to where you are in ...

  • Page 131

    5. Hold the menu button down again to return to the standard screen or to the main menu according to where you are in the menu. Setting the units with this function, it is possible to set the unit of measure- ment in three submenus: “distance”, “consumption” and “temperature”. To set the required un...

  • Page 132

    3. Push the menu button to return to the menu screen or hold the menu button down to return to the standard screen without storing. Buzzer volume with this function, the volume of the acoustic signal which accompanies the display of failure/warning can be ad- justed according to 8 levels. To set the...

  • Page 133

    Unless reset, this message will continue to display each time you turn the ignition switch to the on/run position. To turn off the message temporarily, push and release the menu button. To reset the oil change indicator system (after performing the scheduled maintenance), refer to the following proc...

  • Page 134

    “trip b” can be used to display the figures relating to: • trip distance b • average economy b • average speed b • travel time b (driving time) • reset trip b note: “trip b” functions may be excluded (see “trip b data”). “range” and “instantaneous economy” cannot be reset. “reset trip a” and “reset ...

  • Page 135

    Warning and indicator lights the warning/indicator lights switch on in the instrument panel together with a dedicated message and/or acoustic signal when applicable. These indications are indicative and precautionary and as such must not be considered as exhaustive and/or alternative to the informat...

  • Page 136

    Red telltale indicator lights engine oil level warning light red telltale light what it means engine oil level warning light this warning light appears on the panel when the engine oil level falls below the minimum rec- ommended value. Restore the correct engine oil level or contact your authorized ...

  • Page 137

    Electronic throttle control (etc) warning light red telltale light what it means electronic throttle control (etc) warning light this light informs you of a problem with the electronic throttle control (etc) system. If a prob- lem is detected while the engine is running, the light will either stay o...

  • Page 138

    Seat belt reminder warning light red telltale light what it means seat belt reminder warning light when the ignition is first placed in the on/run position, if the driver’s seat belt is unbuckled, a chime will sound and the light will turn on. When driving, if the driver or front passenger seat belt...

  • Page 139

    Oil pressure warning light red telltale light what it means oil pressure warning light this light indicates low engine oil pressure. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible. A chime will sound when this light turns on. Do not operate the vehi...

  • Page 140

    Door open indicator light red telltale light what it means door open indicator light this indicator will illuminate when one or more door(s) are not fully closed. Note: if the vehicle is moving and a door is opened, there will also be a single chime. Transmission temperature warning light red tellta...

  • Page 141

    Transmission fault warning light red telltale light what it means transmission fault warning light this light will illuminate (together with a message in the instrument cluster display and a buzzer) to indicate a transmission fault. Contact your authorized dealer if the message remains after restart...

  • Page 142

    The dual brake system provides a reserve braking capacity in the event of a failure to a portion of the hydraulic system. A leak in either half of the dual brake system is indicated by the brake warning light, which will turn on when the brake fluid level in the master cylinder has dropped below a s...

  • Page 143

    Anti-lock brake (abs) indicator light yellow telltale light what it means anti-lock brake (abs) indicator light after the ignition is turned on, the anti-lock brake system (abs) light illuminates to indicate function check at vehicle startup. If the light remains on after startup or comes on and sta...

  • Page 144

    Generic warning indicator light yellow telltale light what it means generic warning indicator light the generic warning light will illuminate if any of the following conditions occur: engine oil pressure sensor failure, external light failure, parking sensor failure, dst system failure, air bag warn...

  • Page 145

    Glow plug indicator light — if equipped yellow telltale light what it means glow plug indicator light to prevent possible engine damage while starting at low temperatures, this vehicle will inhibit engine cranking and this icon will blink when the ambient temperature is less than -31° f (-35° c) and...

  • Page 146

    Caution! Do not continue driving with one or more flat tires as handling may be compromised. Stop the vehicle, avoiding sharp braking and steering. Repair immedi- ately using the dedicated tire repair kit and contact your authorized dealer as soon as possible. Each tire, including the spare (if prov...

  • Page 147

    Your vehicle has also been equipped with a tpms malfunc- tion indicator to indicate when the system is not operating properly. The tpms malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute a...

  • Page 148

    Vehicle security indicator light yellow telltale light what it means vehicle security indicator light if during starting, the key code is not correctly recognized, the vehicle security light comes on in the instrument panel. In this case, turn the key to off and then to on/run; if it is still locked...

  • Page 149

    Engine check/malfunction indicator light (mil) yellow telltale light what it means engine check/malfunction indicator light (mil) the engine check/malfunction indicator light (mil) is a part of an onboard diagnostic system called obd ii that monitors engine and automatic transmission control systems...

  • Page 150

    Electronic stability control (esc) indicator light — if equipped yellow telltale light what it means electronic stability control (esc) indicator light — if equipped the “esc indicator light” in the instrument cluster will come on when the ignition is placed in the on/run position, and when esc is a...

  • Page 151

    Electronic stability control (esc) off indicator light — if equipped yellow telltale light what it means electronic stability control (esc) off indicator light — if equipped this light indicates the electronic stability control (esc) is off. Green telltale indicator lights turn signal indicator ligh...

  • Page 152

    Park/headlight on indicator light green telltale light what it means park/headlight on indicator light this indicator will illuminate when the park lights or headlights are turned on. Front fog indicator light — if equipped green telltale light what it means front fog indicator light — if equipped t...

  • Page 153

    Blue telltale indicator lights high beam indicator light blue telltale light what it means high beam indicator light this indicator shows that the high beam headlights are on. Push the multifunction control lever away from you to switch the headlights to high beam. Pull the lever toward you to switc...

  • Page 154

    Warning! • it is not possible to know or to predict all of the possible outcomes if your vehicle’s systems are breached. It may be possible that vehicle systems, including safety related systems, could be impaired or a loss of vehicle control could occur that may result in an accident involving seri...

  • Page 155

    Uconnect 5.0 buttons on the touchscreen and buttons on the faceplate 1 — uconnect buttons on the touchscreen 2 — uconnect buttons on the faceplate uconnect 5.0 nav buttons on the touchscreen and buttons on the faceplate 1 — uconnect buttons on the touchscreen 2 — uconnect buttons on the faceplate 4 ...

  • Page 156

    Buttons on the faceplate buttons on the faceplate are located below the uconnect system in the center of the instrument panel. In addition, there is a scroll/enter control knob located on the right side. Turn the control knob to scroll through menus and change settings (i.E., 30, 60, 90), push the c...

  • Page 157

    Display after pressing the “display” button on the touchscreen, the following settings will be available: setting name selectable options display mode manual auto brightness with headlights on with headlights off note: to make changes to the “brightness” setting, the headlights must be on and the in...

  • Page 158

    Setting name selectable options touchscreen beep on off display trip b on off note: press the relevant button to activate/deactivate the displaying of the trip b on the instrument cluster display. Voice after pressing the “voice” button on the touchscreen, the following settings will be available: s...

  • Page 159

    Clock & date after pressing the “clock & date” button on the touchscreen, the following settings will be available: setting name selectable options set time and for- mat — if equipped 12h 24h am pm show time statues — if equipped on off set date day month note: by selecting this setting, the day and...

  • Page 160

    Safety/assistance after pressing the “safety/assistance” button on the touchscreen, the following settings will be available: setting name selectable options parkview rear backup camera active guide lines — if equipped note: the “parkview backup camera active guide lines” setting overlays the rear b...

  • Page 161

    Lights after pressing the “lights” button on the touchscreen, the following settings will be available: setting name selectable options daytime running lights — if equipped on off note: when the “daytime running lights” feature is selected, the headlights will turn on whenever the engine is running....

  • Page 162

    Engine off options after pressing the “engine off options” button on the touchscreen, the following settings will be available: setting name selectable options radio off delay 0 min 20 min note: when this setting is selected, the radio will remain off for the selected amount of time when the engine ...

  • Page 163

    Setting name selectable options speed adjusted volume — if equipped off 1 2 3 note: the “speed adjusted volume” feature increases or decreases volume relative to vehicle speed. Surround sound — if equipped on off loudness — if equipped on off note: the “loudness” feature improves sound quality at lo...

  • Page 164

    Phone/bluetooth after pressing the “phone/bluetooth” button on the touchscreen, the following settings will be available: setting name selectable options paired phones/devices list of paired phones/devices note: this feature shows which phones are paired to the phone/bluetooth system. For further in...

  • Page 165

    Setting name selectable options subscription info sirius id note: new vehicle purchasers or lessees will receive a free limited time subscription to siriusxm satellite radio with your radio. Following the expiration of the free services, it will be necessary to access the information on the subscrip...

  • Page 166

    Setting name selectable options regional on off note: forces the system to select from a network station when the system is present in a different region. Restore settings — if equipped after pressing the “restore settings” button on the touchscreen, the following settings will be available: setting...

  • Page 167

    Uconnect radios for detailed information about your uconnect radio, refer to your uconnect owner’s manual supplement. Ipod/usb/mp3 control — if equipped the usb input and auxiliary jack is located on the instrument panel below the climate controls. This feature allows an ipod or external usb device ...

  • Page 168

    Steering wheel audio controls — if equipped the remote sound system controls are located on the back surface of the steering wheel. Reach behind the wheel to access the switches. The right hand control is a rocker type switch with a push-button in the center. Pushing the top of the switch will incre...

  • Page 169

    Radio operation and mobile phones under certain conditions, the mobile phone being on in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the mobile phone. This condition is not harmful to the radio. If your radio perform...

  • Page 170

    Manual climate control descriptions icon description a/c button push the a/c button to engage the air conditioning (a/c). A led will illuminate when the a/c system is engaged. Recirculation button press and release this button to change the system between recirculation mode and outside air mode. Rec...

  • Page 171

    Icon description front defrost turn the knob to the front defrost position. Air comes from the windshield and side window demist outlets. When the defrost button is selected, the blower level will increase. Use defrost mode with maximum temperature settings for best windshield and side window defros...

  • Page 172

    Icon description modes control push the button in the center of the knob to change the airflow distribution mode. The airflow distribution mode can be adjusted so air comes from the instrument panel outlets, floor outlets, defrost outlets and demist outlets. The mode settings are as follows: panel m...

  • Page 173

    Icon description floor mode floor mode air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Mix mode mix mode air is directed through the floor, defrost, and side window demister outlets. This setting works best in cold or snowy c...

  • Page 174

    Climate control functions a/c (air conditioning) the air conditioning (a/c) button allows the operator to manually activate or deactivate the air conditioning sys- tem. When the air conditioning system is turned on, cool dehumidified air will flow through the outlets into the cabin. For improved fue...

  • Page 175

    Operating tips note: refer to the chart at the end of this section for suggested control settings for various weather conditions. Summer operation the engine cooling system must be protected with a high-quality antifreeze coolant to provide proper corrosion protection and to protect against engine o...

  • Page 176

    Outside air intake make sure the air intake, located directly in front of the windshield, is free of obstructions such as leaves. Leaves collected in the air intake may reduce airflow, can cause odor, and if they enter the plenum they could plug the water drains. In winter months make sure the air i...

  • Page 177

    Control setting suggestions for various weather conditions control settings suggestions for various weather conditions chart 4 understanding your instrument panel 175.

  • Page 178

    Uconnect 5.0 voice recognition quick tips — if equipped introducing uconnect start using uconnect voice recognition with these helpful quick tips. It provides the key voice commands and tips you need to know to control your uconnect 5.0/5.0 nav system. Key features: • 5.0” full color touchscreen dis...

  • Page 179

    Get started all you need to control your uconnect system with your voice are the buttons on your steering wheel. 1. Visit uconnectphone.Com to check mobile device and feature compatibility and to find phone pairing instruc- tions. 2. Reduce background noise. Wind and passenger conver- sations are ex...

  • Page 180

    Radio use your voice to quickly get to the am, fm or siriusxm satellite radio stations you would like to hear. (subscrip- tion or included siriusxm satellite radio trial required.) push the vr button . After the beep, say ѧ • tune to ninety-five-point-five fm • tune to satellite channel hits 1 tip: ...

  • Page 181

    Notice the visual cues that inform you of your voice recognition system’s status. Cues appear on the touch- screen. Media uconnect offers connections via usb, bluetooth and auxil- iary ports (if equipped). Voice operation is only available for connected usb and ipod devices. Push the vr button . Aft...

  • Page 182

    Phone making and answering hands-free phone calls is easy with uconnect. When the phonebook button is illuminated on your touchscreen, your system is ready. Check uconnectphone.Com for mobile phone compatibility and pairing instructions. Push the phone button . After the beep, say one of the followi...

  • Page 183

    Pre-defined voice text reply responses yes. Stuck in traffic. See you later. No. Start without me. I’ll be late. Okay. Where are you? I will be ber> minutes late. Call me. Are you there yet? I’ll call you later. I need directions. See you in of minutes. I’m on my way. Can’t talk right now. I’m lost....

  • Page 185: Starting And Operating

    Starting and operating contents 䡵 starting procedures . . . . . . . . . . . . . . . . .186 ▫ automatic transmission . . . . . . . . . . . . . . . . . .186 ▫ normal starting . . . . . . . . . . . . . . . . . . . . . . . .186 ▫ extreme cold weather (below –20°f or −29°c) . . .186 ▫ extended park start...

  • Page 186

    ▫ traction control system (tcs) . . . . . . . . . . . . .204 ▫ hill start assist (hsa) . . . . . . . . . . . . . . . . . . .204 ▫ electronic stability control (esc) . . . . . . . . . . .205 ▫ esc activation/malfunction indicator light and esc off indicator light . . . . . . . . . . . . . .206 ▫ elec...

  • Page 187

    䡵 fuel requirements . . . . . . . . . . . . . . . . . . .235 ▫ 2.4l engine . . . . . . . . . . . . . . . . . . . . . . . . . . .235 ▫ reformulated gasoline . . . . . . . . . . . . . . . . . .236 ▫ gasoline/oxygenate blends . . . . . . . . . . . . . . .236 ▫ e-85 usage in non-flex fuel vehicles. . . ...

  • Page 188

    Starting procedures before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. Warning! • never leave children alone in a vehicle, or with access to an unlocked vehicle. • allowing children to be in a vehicle unattended is dangerous for a numb...

  • Page 189

    Extended park starting note: extended park condition occurs when the vehicle has not been started or driven for at least 30 days. 1. Install a battery charger or jumper cables to the battery to ensure a full battery charge during the crank cycle. 2. Cycle the ignition in the start position and relea...

  • Page 190

    Engine block heater — if equipped the engine block heater warms the engine and permits quicker starts in cold weather. Connect the cord to a 110-115 volt ac electrical outlet with a grounded, three-wire extension cord. For ambient temperatures below 0°f (-18°c), the engine block heater is recommende...

  • Page 191

    Warning! (continued) vehicle could accelerate quickly forward or in re- verse. You could lose control of the vehicle and hit someone or something. Only shift into gear when the engine is idling normally and your foot is firmly pressing the brake pedal. • unintended movement of a vehicle could injure...

  • Page 192

    Key ignition park interlock this vehicle is equipped with a key ignition park interlock which requires the transmission to be in park before the ignition can be turned to the full lock/off (key removal) position. The key can only be removed from the ignition when the ignition is in the full lock/off...

  • Page 193

    Shift control (refer to ⬙electronic range select (ers) opera- tion ⬙ in this section for further information). Moving the gear selector into the ers (-/+) position (beside the drive position) activates ers mode, displays the current gear in the instrument cluster, and prevents automatic upshifts bey...

  • Page 194

    Never attempt to use park while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range. When parking on a level surface, you may shift the transmission into park first, and then apply the parking brake. When parking on a hill, apply the parking brake before shifting...

  • Page 195

    Warning! (continued) remove the ignition key. Once the key is removed, the transmission is locked in park, securing the vehicle against unwanted movement. • when leaving the vehicle, always remove the igni- tion key from the vehicle and lock the vehicle. • never leave children alone in a vehicle, or...

  • Page 196

    Started in this range. Apply the parking brake and shift the transmission into park if you must leave the vehicle. Warning! Do not coast in neutral and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions. You mi...

  • Page 197

    During cold temperatures, transmission operation may be modified depending on engine and transmission tempera- ture as well as vehicle speed. This feature improves warm up time of the engine and transmission to achieve maxi- mum efficiency. Engagement of the torque converter clutch, and shifts into ...

  • Page 198

    Note: the torque converter clutch will not engage until the transmission fluid is warm [usually after 1 to 3 miles (2 to 5 km) of driving]. Because the engine speed is higher when the torque converter clutch is not engaged, it may seem as if the transmission is not shifting properly when cold. This ...

  • Page 199

    Warning! Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the front wheels. You could lose control of the vehicle and possibly have a collision. Accelerate slowly and care- fully whenever there is likely to be poor traction (ice, snow, wet, mud, loos...

  • Page 200

    Shallow standing water although your vehicle is capable of driving through shal- low standing water, consider the following cautions and warnings before doing so. Warning! • driving through standing water limits your vehicle’s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through ...

  • Page 201

    Power steering the standard power steering system will give you good vehicle response and increased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interrupted, it will still be possible t...

  • Page 202

    Caution! Do not use chemical flushes in your power steering system as the chemicals can damage your power steer- ing components. Such damage is not covered by the new vehicle limited warranty. If necessary, add fluid to restore to the proper indicated level. With a clean cloth, wipe any spilled flui...

  • Page 203

    • this light only shows that the parking brake is applied. It does not show the degree of brake application. When parking on a hill, it is important to turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade. For vehicles equipped with an automatic transmi...

  • Page 204

    Brake system your vehicle is equipped with dual hydraulic brake sys- tems. If either of the two hydraulic systems loses normal capability, the remaining system will still function. How- ever, there will be some loss of overall braking effective- ness. You may notice increased pedal travel during app...

  • Page 205

    Warning! (continued) • the anti-lock brake system (abs) cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking or steering effi- ciency beyond that afforded by the condition of the vehicle brakes and tires or the traction afforded. • the abs cannot prevent...

  • Page 206

    Warning! (continued) • the capabilities of a bas-equipped vehicle must never be exploited in a reckless or dangerous manner which could jeopardize the user’s safety or the safety of others. Traction control system (tcs) the traction control system (tcs) monitors the amount of wheel spin of each of t...

  • Page 207

    Warning! There may be situations on minor hills with a loaded vehicle, or while pulling a trailer, when the system will not activate and slight rolling may occur. This could cause a collision with another vehicle or object. Always remember the driver is responsible for braking the vehicle. Electroni...

  • Page 208

    Warning! (continued) type and size or wheel size may adversely affect esc performance. Improperly inflated and unevenly worn tires may also degrade esc performance. Any vehicle modification or poor vehicle maintenance that reduces the effectiveness of the esc system can increase the risk of loss of ...

  • Page 209

    Esc operating modes the esc system has two available operating modes. Full on this is the normal operating mode for esc. Whenever the vehicle is started the system will be in this mode. This mode should be used for most driving situations. Esc should only be turned to “partial off” for specific reas...

  • Page 210

    Warning! When in “partial off” mode, the tcs functionality of esc (except for the limited slip feature described in the tcs section) has been disabled and the “esc off indicator light” will be illuminated. When in “partial off” mode, the engine power reduction of tcs is disabled, and the enhanced ve...

  • Page 211

    Tire safety information tire markings note: • p (passenger) — metric tire sizing is based on u.S. Design standards. P-metric tires have the letter “p” molded into the sidewall preceding the size designation. Example: p215/65r15 95h. • european — metric tire sizing is based on european design standar...

  • Page 212

    Tire sizing chart example: example size designation: p215/65r15xl 95h, 215/65r15 96h, lt235/85r16c, t145/80d18 103m, 31x10.5 r15 lt p = passenger car tire size based on u.S. Design standards, or ⴖ....Blank....ⴖ = passenger car tire based on european design standards, or lt = light truck tire based o...

  • Page 213

    Example: service description: 95 = load index – a numerical code associated with the maximum load a tire can carry h = speed symbol – a symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions – the maximum speed corres...

  • Page 214

    Tire identification number (tin) the tin may be found on one or both sides of the tire; however, the date code may only be on one side. Tires with white sidewalls will have the full tin, including the date code, located on the white sidewall side of the tire. Look for the tin on the outboard side of...

  • Page 215

    Tire terminology and definitions term definition b-pillar the vehicle b-pillar is the structural member of the body located be- hind the front door. Cold tire inflation pressure cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hour...

  • Page 216

    Tire loading and tire pressure tire and loading information placard location note: the proper cold tire inflation pressure is listed on the driver’s side b-pillar or the rear edge of the driver’s side door. Check the inflation pressure of each tire, including the spare tire (if equipped), at least m...

  • Page 217

    Warning! (continued) • improperly inflated tires are dangerous and can cause collisions. Under-inflation increases tire flex- ing and can result in over-heating and tire failure. Over-inflation reduces a tire’s ability to cushion shock. Objects on the road and chuck holes can cause damage that resul...

  • Page 218

    Loading the vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the tire and loading informati...

  • Page 219

    Metric example for load limit for example, if “xxx” amount equals 635 kg, and there will be five 68 kg passengers in your vehicle, the amount of available cargo and luggage load capacity is 295 kg (635- 340 (5x68) = 295 kg) as shown in step 4. Note: • if your vehicle will be towing a trailer, load f...

  • Page 220

    Warning! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the rec- ommended load capacity for your vehicle. Never over- load them. 218 starting and operating.

  • Page 221

    Tires — general information tire pressure proper tire inflation pressure is essential to the safe and satisfactory operation of your vehicle. Four primary areas are affected by improper tire pressure: • safety and vehicle stability • economy • tread wear • ride comfort safety warning! • improperly i...

  • Page 222

    Fuel economy underinflated tires will increase tire rolling resistance resulting in higher fuel consumption. Tread wear improper cold tire inflation pressures can cause abnormal wear patterns and reduced tread life, resulting in the need for earlier tire replacement. Ride comfort and vehicle stabili...

  • Page 223

    Pressure should be increased by 3 psi (21 kpa), which equals 1 psi (7 kpa) for every 12°f (7°c) for this outside temperature condition. Tire pressure may increase from 2 to 6 psi (13 to 40 kpa) during operation. Do not reduce this normal pressure build up or your tire pressure will be too low. Tire ...

  • Page 224

    Tire types all season tires — if equipped all season tires provide traction for all seasons (spring, summer, fall and winter). Traction levels may vary be- tween different all season tires. All season tires can be identified by the m+s, m&s, m/s or ms designation on the tire sidewall. Use all season...

  • Page 225

    While studded tires improve performance on ice, skid and traction capability on wet or dry surfaces may be poorer than that of non-studded tires. Some states prohibit stud- ded tires; therefore, local laws should be checked before using these tire types. Run flat tires — if equipped run flat tires a...

  • Page 226

    Compact spare tire — if equipped the compact spare is for temporary emergency use only. You can identify if your vehicle is equipped with a compact spare by looking at the spare tire description on the tire and loading information placard located on the driver’s side door opening or on the sidewall ...

  • Page 227

    Do not install a wheel cover or attempt to mount a conventional tire on the collapsible spare wheel, since the wheel is designed specifically for the collapsible spare tire. Warning! Compact and collapsible spares are for temporary emergency use only. With these spares, do not drive more than 50 mph...

  • Page 228

    Tire spinning when stuck in mud, sand, snow, or ice conditions, do not spin your vehicle’s wheels above 30 mph (48 km/h) or for longer than 30 seconds continuously without stopping. Refer to “freeing a stuck vehicle” in “what to do in emergencies” for further information. Warning! Fast spinning tire...

  • Page 229

    Life of tire the service life of a tire is dependent upon varying factors including, but not limited to: • driving style. • tire pressure – improper cold tire inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life, res...

  • Page 230

    It is recommended you contact your authorized tire dealer or original equipment dealer with any questions you may have on tire specifications or capability. Failure to use equivalent replacement tires may adversely affect the safety, handling, and ride of your vehicle. Warning! • do not use a tire, ...

  • Page 231

    Tire rotation recommendations the tires on the front and rear of your vehicle operate at different loads and perform different steering, driving, and braking functions. For these reasons, they wear at unequal rates. These effects can be reduced by timely rotation of tires. The benefits of rotation a...

  • Page 232

    Treadwear the treadwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded 100. The relativ...

  • Page 233

    Warning! The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, under-inflation, or excessive load- ing, either separately or in combination, can cause heat buildup and possible tire failure. Tire pressure monitoring system (tpms)...

  • Page 234

    For example, your vehicle may have a recommended cold (parked for more than three hours) tire pressure of 30 psi (207 kpa). If the ambient temperature is 68°f (20°c) and the measured tire pressure is 27 psi (186 kpa), a temperature drop to 20°f (-7°c) will decrease the tire pressure to approximately...

  • Page 235

    • the tpms is not a substitute for proper tire mainte- nance, and it is the driver’s responsibility to maintain correct tire pressure using an accurate tire gauge, even if under-inflation has not reached the level to trigger illumination of the tire pressure monitoring telltale light. • seasonal tem...

  • Page 236

    Proper text message will be displayed. If the ignition key is cycled, this sequence will repeat providing the system fault still exists. The tire pressure monitoring telltale light will turn off when the fault condition no longer exists. A system fault can occur with any of the following scenarios: ...

  • Page 237

    Note: for a correct tire pressure monitoring behavior, please wait for about 20 minutes in key-off during each tire substitution. General information this device complies with part 15 of the fcc rules and rss-210 of industry canada. Operation is subject to the following two conditions: (1) this devi...

  • Page 238

    Reformulated gasoline many areas of the country require the use of cleaner burning gasoline referred to as “reformulated gasoline”. Reformulated gasoline contains oxygenates and are specifi- cally blended to reduce vehicle emissions and improve air quality. The use of reformulated gasoline is recomm...

  • Page 239

    Cng and lp fuel system modifications modifications that allow the engine to run on compressed natural gas (cng) or liquid propane (lp) may result in damage to the engine, emissions, and fuel system compo- nents. Problems that result from running cng or lp are not the responsibility of the manufactur...

  • Page 240

    Fuel system cautions caution! Follow these guidelines to maintain your vehicle’s performance: • the use of leaded gasoline is prohibited by federal law. Using leaded gasoline can impair engine perfor- mance and damage the emissions control system. • an out-of-tune engine or certain fuel or ignition ...

  • Page 241

    Adding fuel the gas cap is located behind the fuel filler door on the left side of the vehicle. If the gas cap is lost or damaged, be sure the replacement cap is for use with this vehicle. 1. Open the fuel filler door. 2. Remove the fuel cap by rotating it counterclockwise. 3. Fully insert the gasol...

  • Page 242

    Caution! (continued) • to avoid fuel spillage and overfilling, do not “top off” the fuel tank after filling. Note: • when the fuel nozzle “clicks” or shuts off, the fuel tank is full. • tighten the fuel filler cap until you hear a “clicking” sound. This is an indication that the fuel filler cap is p...

  • Page 243

    Gross axle weight rating (gawr) the gawr is the maximum capacity of the front and rear axles. Distribute the load over the front and rear axles evenly. Make sure that you do not exceed either front or rear gawr. Warning! Because the front wheels steer the vehicle, it is impor- tant that you do not e...

  • Page 244

    Overloading can cause potential safety hazards and shorten useful service life. Heavier axles or suspension components do not necessarily increase the vehicle’s gvwr. Loading to load your vehicle properly, first figure out its empty weight, axle-by-axle and side-by-side. Store heavier items down low...

  • Page 245

    Gross trailer weight (gtw) the gtw is the weight of the trailer plus the weight of all cargo, consumables and equipment (permanent or tempo- rary) loaded in or on the trailer in its ⬙loaded and ready for operation ⬙ condition. The recommended way to measure gtw is to put your fully loaded trailer on...

  • Page 246

    Weight-carrying hitch a weight-carrying hitch supports the trailer tongue weight, just as if it were luggage located at a hitch ball or some other connecting point of the vehicle. These kinds of hitches are the most popular on the market today and they are commonly used to tow small and medium sized...

  • Page 247

    Trailer hitch classification definitions class max. Trailer hitch industry standards class i - light duty 2,000 lbs (907 kg) class ii - medium duty 3,500 lbs (1,587 kg) class iii - heavy duty 5,000 lbs (2,267 kg) class iv - extra heavy duty 10,000 lbs (4,535 kg) refer to the “trailer towing weights ...

  • Page 248

    Consider the following items when computing the weight on the rear axle of the vehicle: • the tongue weight of the trailer. • the weight of any other type of cargo or equipment put in or on your vehicle. • the weight of the driver and all passengers. Note: remember that everything put into or on the...

  • Page 249

    Warning! (continued) • when hauling cargo or towing a trailer, do not overload your vehicle or trailer. Overloading can cause a loss of control, poor performance or damage to brakes, axle, engine, transmission, steering, sus- pension, chassis structure or tires. • safety chains must always be used b...

  • Page 250

    • check for signs of tire wear or visible tire damage before towing a trailer. Refer to “tires – general information” in “starting and operating” for the proper inspection procedure. • when replacing tires, refer to “tires – general informa- tion” in “starting and operating” for the proper tire repl...

  • Page 251

    Towing requirements — trailer lights and wiring whenever you pull a trailer, regardless of the trailer size, stoplights and turn signals on the trailer are required for motoring safety. The trailer tow package may include a four- and seven-pin wiring harness. Use a factory approved trailer harness a...

  • Page 252

    Four-pin connector 1 — female pins 4 — park 2 — male pin 5 — left stop/turn 3 — ground 6 — right stop/turn seven-pin connector 1 — battery 5 — ground 2 — backup lamps 6 — left stop/turn 3 — right stop/turn 7 — running lamps 4 — electric brakes 250 starting and operating.

  • Page 253

    Towing tips before setting out on a trip, practice turning, stopping, and backing up the trailer in an area located away from heavy traffic. Automatic transmission the drive range can be selected when towing. The transmis- sion controls include a drive strategy to avoid frequent shifting when towing...

  • Page 254

    Recreational towing (behind motorhome, etc.) towing this vehicle behind another vehicle towing condition wheels off the ground automatic transmission flat tow none not allowed dolly tow front ok rear not allowed on trailer all ok note: when towing your vehicle, always follow appli- cable state and p...

  • Page 255: Contents

    What to do in emergencies contents 䡵 hazard warning flashers . . . . . . . . . . . .254 䡵 if your engine overheats . . . . . . . . . . . . .254 䡵 wheel and tire torque specifications . .255 ▫ torque specifications . . . . . . . . . . . . . . . . . . . .255 䡵 tire service kit — if equipped . . . . . ...

  • Page 256

    Hazard warning flashers the hazard warning flasher switch is located on the instrument panel above the climate controls. Push the switch to turn on the hazard warning flasher. When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emergency. P...

  • Page 257

    Warning! You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiator or coolant b...

  • Page 258

    Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles. Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice. After 25 miles (40 km), check the lug nut/bolt torque to be sure that all the lug nuts/bolts are prope...

  • Page 259

    Tire service kit — if equipped small punctures up to ¼” (6 mm) in the tire tread can be sealed with tire service kit. Foreign objects (e.G., screws or nails) should not be removed from the tire. Tire service kit can be used in outside temperatures down to approxi- mately -4°f (-20°c). This kit will ...

  • Page 260

    Warning! (continued) • do not use tire service kit or drive the vehicle under the following circumstances: • if the puncture in the tire tread is approximately 1/4 inch (6 mm) or larger. • if the tire has any sidewall damage. • if the tire has any damage from driving with extremely low tire pressure...

  • Page 261

    Insert the power plug into the vehicle power outlet socket. Start the vehicle engine. Push the tire service kit power button to the “i” position. The electric compressor will be turned on, sealant and air will inflate the tire. Minimum 26 psi (1.8 bar) of pressure should be reached within 20 minutes...

  • Page 262

    Note: replace the sealant canister prior to the expiration date at your authorized dealer. Warning! Store the sealant canister in its special compartment, away from sources of heat. Failure to follow this warning may result in sealant canister rupture and serious injury or death. Jacking and tire ch...

  • Page 263

    Jack location the jack and tools are stowed under the driver’s front seat. Removing the spare tire 1. Remove the spare tire before attempting to jack up the vehicle. Attach the wrench handle to the winch extension. Jack/tools location jack tools 1 — wrench handle 2 — winch extension 3 — emergency sc...

  • Page 264

    2. To access the winch mechanism open the rear doors of the vehicle to expose the winch mechanism access cover. Remove the access cover and install the winch extension into the winch mechanism. 3. Rotate the wheel wrench handle counterclockwise until the spare tire is on the ground with enough cable...

  • Page 265

    4. Pull the spare tire out from under the vehicle to gain access to the spare tire retainer. 5. Remove the retainer nut prior to removing the retainer from the wheel. Spare tire retainer nut 6 what to do in emergencies 263.

  • Page 266

    6. Lift the spare tire with one hand to give clearance to tilt the retainer at the end of the cable. 7. Pull the retainer through the center of the wheel. Lifting spare tire retainer 264 what to do in emergencies.

  • Page 267

    Preparations for jacking 1. Park the vehicle on a firm level surface as far from the edge of the roadway as possible. Avoid icy or slippery areas. Warning! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid being hit when operati...

  • Page 268

    Warning! (continued) • if working on or near a roadway, be extremely careful of motor traffic. • to assure that spare tires, flat or inflated, are securely stowed, spares must be stowed with the valve stem facing the ground. • the stowed spare tire should always be checked for security by pushing on...

  • Page 269

    1. Loosen (but do not remove) the wheel lug bolts with the wrench handle by turning them to the left one turn while the wheel is still on the ground. 2. There are two jack engagement locations on each side of the vehicle body. Note: place the jack underneath the jack engagement location that is clos...

  • Page 270

    Warning! Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never get any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift...

  • Page 271

    Caution! Do not attempt to raise the vehicle by jacking on locations other than those indicated. 3. Turn the handle on the jack screw to the right until the jack head is properly engaged in the described location. Do not raise the vehicle until you are sure the jack is securely engaged. 4. Raise the...

  • Page 272

    5. Remove the wheel lug bolts. For vehicles with wheel covers, remove the cover from the wheel by hand. Do not pry the wheel cover off. Then pull the wheel off the hub. 6. Install the spare tire. Lightly tighten the wheel lug bolts using the bolt install wrench. Warning! To avoid the risk of forcing...

  • Page 273

    Warning! A loose tire or jack thrown forward in a collision or hard stop could endanger the occupants of the vehicle. Always stow the jack parts and the spare tire in the places provided. Have the deflated (flat) tire repaired or replaced immediately. 10. Stow the cable and wheel spacer before drivi...

  • Page 274

    2. The plastic fin must be directed downwards and per- fectly coincide with the flange cut part; fit the bracket in the adapter, fold the bracket up and secure it to the adapter with the fastening knob. 3. Position the tire vertically and lay the mounted adapter on the inner part of the rim, using t...

  • Page 275

    Vehicles equipped with wheel covers 1. Mount the road tire on the axle. 2. To ease the installation process for steel wheels with wheel covers, install two wheel bolts on the wheel. Install the wheel bolts with the threaded end of the bolt toward the wheel. Lightly tighten the wheel bolts. 3. Align ...

  • Page 276

    7. After 25 miles (40 km) check the wheel bolt torque with a torque wrench to ensure that all wheel bolts are properly seated against the wheel. Jump-starting procedures if your vehicle has a discharged battery, it can be jump- started using a set of jumper cables and a battery in another vehicle or...

  • Page 277

    Warning! • take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime the ignition switch is on. You can be injured by moving fan blades. • remove any metal jewelry such as rings, watch bands and bracelets that could make an inadvertent electrical contact. You coul...

  • Page 278

    Connecting the jumper cables 1. Connect the positive (+) end of the jumper cable to the positive (+) post of the discharged vehicle. 2. Connect the opposite end of the positive (+) jumper cable to the positive (+) post of the booster battery. 3. Connect the negative (-) end of the jumper cable to th...

  • Page 279

    Freeing a stuck vehicle if your vehicle becomes stuck in mud, sand, or snow, it can often be moved using a rocking motion. Turn the steering wheel right and left to clear the area around the front wheels. Push and hold the lock button on the gear selector. Then shift back and forth between drive and...

  • Page 280

    Caution! (continued) • revving the engine or spinning the wheels too fast may lead to transmission overheating and failure. It can also damage the tires. Do not spin the wheels above 30 mph (48 km/h) while in gear (no transmis- sion shifting occurring). Towing a disabled vehicle this section describ...

  • Page 281

    Proper towing or lifting equipment is required to prevent damage to your vehicle. Use only tow bars and other equipment designed for this purpose, following equipment manufacturer’s instructions. Use of safety chains is man- datory. Attach a tow bar or other towing device to main structural members ...

  • Page 282

    4. Press and maintain firm pressure on the brake pedal. 5. Insert a small screwdriver or a similar tool into the gear selector override access hole (at the right front corner of the gear selector assembly), then push and hold the override release lever down. While holding the override release lever ...

  • Page 283

    Ignition key removal override this vehicle is equipped with a key ignition park interlock which requires the transmission to be in park before the ignition switch can be turned to the lock/off (key removal) position. To remove the key manually, proceed as follows: 1. Firmly apply the parking brake. ...

  • Page 284

    7. Once the key is removed, reinstall the steering column cover. Caution! It is advisable to contact your authorized dealer to have the reinstall procedure carried out. If you would like to proceed in performing the reinstall procedure special attention must be paid to the correct coupling of the cl...

  • Page 285: Maintaining Your Vehicle

    Maintaining your vehicle contents 䡵 engine compartment — 2.4l . . . . . . . . . . .285 䡵 onboard diagnostic system — obd ii . . .286 ▫ onboard diagnostic system (obd ii) cybersecurity . . . . . . . . . . . . . . . . . . . . . . . . .286 ▫ loose fuel filler cap message . . . . . . . . . . . . .287 䡵 ...

  • Page 286

    䡵 vehicle storage . . . . . . . . . . . . . . . . . . . . .319 䡵 replacement bulbs . . . . . . . . . . . . . . . . . . .319 䡵 bulb replacement . . . . . . . . . . . . . . . . . . . .321 ▫ exterior bulbs . . . . . . . . . . . . . . . . . . . . . . . . .321 ▫ interior bulbs. . . . . . . . . . . . . . ...

  • Page 287

    Engine compartment — 2.4l 1 — air cleaner filter 5 — power distribution center (fuses) 2 — power steering fluid reservoir 6 — washer fluid reservoir 3 — oil fill cap 7 — engine coolant pressure cap 4 — brake fluid reservoir 8 — engine oil dipstick 7 maintaining your vehicle 285.

  • Page 288

    Onboard diagnostic system — obd ii your vehicle is equipped with a sophisticated onboard diagnostic system called obd ii. This system monitors the performance of the emissions, engine, and automatic trans- mission control systems. When these systems are operating properly, your vehicle will provide ...

  • Page 289

    Warning! (continued) vehicle control could occur that may result in an accident involving serious injury or death. • access, or allow others to access, information stored in your vehicle systems, including personal information. For further information, refer to “cybersecurity” in the “understanding ...

  • Page 290

    2. As soon as you cycle the ignition to the on mode, you will see the “malfunction indicator light (mil)” symbol come on as part of a normal bulb check. 3. Approximately 15 seconds later, one of two things will happen: • the mil will flash for about 10 seconds and then return to being fully illumina...

  • Page 291

    Warning! You can be badly injured working on or around a motor vehicle. Only do service work for which you have the knowledge and the proper equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic. Maintenance procedures the pages that ...

  • Page 292

    There are three possible dipstick types, • crosshatched zone. • crosshatched zone marked safe. • crosshatched zone marked with min at the low end of the range and max at the high end of the range. Note: always maintain the oil level within the crosshatch markings on the dipstick. Adding 1 quart (1.0...

  • Page 293

    Caution! Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is not covered by the new vehicle limited warranty. Engine oil viscosity (sae grade) — 2.4l engine mopar sae 0w-20 engine oil approved to fca material standard ms-6395 such as pennzoil, shell...

  • Page 294

    Engine oil filter the engine oil filter should be replaced with a new filter at every engine oil change. Engine oil filter selection this manufacturer’s engines have a full-flow type dispos- able oil filter. Use a filter of this type for replacement. The quality of replacement filters varies conside...

  • Page 295

    Warning! • battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing. Do not lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water. Ref...

  • Page 296

    Warning! • use only refrigerants and compressor lubricants ap- proved by the manufacturer for your air conditioning system. Some unapproved refrigerants are flam- mable and can explode, injuring you. Other unap- proved refrigerants or lubricants can cause the sys- tem to fail, requiring costly repai...

  • Page 297

    Body lubrication locks and all body pivot points, including such items as seat tracks, door hinge pivot points and rollers, liftgate, tailgate, decklid, sliding doors and hood hinges, should be lubricated periodically with a lithium based grease, such as mopar spray white lube to assure quiet, easy ...

  • Page 298

    Windshield wiper then executes part of a stroke; at each command, approximately 1/3 of a normal wiper stroke is triggered. Note: the previous operation can be repeated up to three times. In order to move the blades to the most suitable position. 4. Lift the blade from the windshield and proceed with...

  • Page 299

    Loose connections could permit exhaust fumes to seep into the passenger compartment. In addition, have the exhaust system inspected each time the vehicle is raised for lubri- cation or oil change. Replace as required. Warning! • exhaust gases can injure or kill. They contain carbon monoxide (co), wh...

  • Page 300

    In unusual situations involving grossly malfunctioning engine operation, a scorching odor may suggest severe and abnormal catalyst overheating. If this occurs, stop the vehicle, turn off the engine and allow it to cool. Service, including a tune-up to manufacturer’s specifications, should be obtaine...

  • Page 301

    Cooling system — drain, flush and refill note: some vehicles require special tools to add coolant properly. Failure to fill these systems properly could lead to severe internal engine damage. If any coolant is needed to be added to the system, please contact your local autho- rized dealer. If the en...

  • Page 302

    Adding coolant your vehicle has been built with an improved engine coolant (oat coolant conforming to ms.90032) that allows extended maintenance intervals. This engine coolant (anti- freeze) can be used up to ten years or 150,000 miles (240,000 km) before replacement. To prevent reducing this extend...

  • Page 303

    Cooling system pressure cap the cap must be fully tightened to prevent loss of engine coolant (antifreeze), and to ensure that engine coolant (antifreeze) will return to the radiator from the coolant recovery tank. The cap should be inspected and cleaned if there is any accumulation of foreign mater...

  • Page 304

    The radiator normally remains completely full, so there is no need to remove the radiator/coolant pressure cap unless checking for engine coolant (antifreeze) freeze point or replacing coolant. Advise your service attendant of this. As long as the engine operating temperature is satisfactory, the co...

  • Page 305

    Brake system in order to assure brake system performance, all brake system components should be inspected periodically. Refer to the “maintenance schedule” for the proper maintenance intervals. Warning! Riding the brakes can lead to brake failure and possi- bly a collision. Driving with your foot re...

  • Page 306

    Warning! (continued) • overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts, causing the brake fluid to catch fire. Brake fluid can also damage painted and vinyl surfaces, care should be taken to avoid its contact with these surfaces. • do not allow petroleum ...

  • Page 307

    Caution! Using a transmission fluid other than the manufactur- er’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder. Refer to “fluids, lubricants, and genuine parts” in this section for fluid specifications. Special additives the manufacturer s...

  • Page 308

    Routine fluid and filter changes are not required. However, change the fluid and filter if the fluid becomes contami- nated (with water, etc.), or if the transmission is disas- sembled for any reason. Appearance care and protection from corrosion protection of body and paint from corrosion vehicle b...

  • Page 309

    Caution! • do not use abrasive or strong cleaning materials such as steel wool or scouring powder that will scratch metal and painted surfaces. • use of power washers exceeding 1,200 psi (8 274 kpa) can result in damage or removal of paint and decals. Special care • if you drive on salted or dusty r...

  • Page 310

    Note: many aftermarket wheel cleaners contain strong acids or strong alkaline additives that can harm the wheel surface. Caution! Avoid products or automatic car washes that use acidic solutions or strong alkaline additives or harsh brushes. These products and automatic car washes may damage the whe...

  • Page 311

    Caution! (continued) covered by the new vehicle limited warranty. Use only mild soap and water with a soft cloth. Used on a regular basis; this is all that is required to maintain this finish. Stain repel fabric cleaning procedure — if equipped stain repel seats may be cleaned in the following manne...

  • Page 312

    Warning! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm. Caution! • direct contact of air fresheners, insect repellents, suntan lotions, or hand sanitizers to the plastic, painted, or decorated surfaces ...

  • Page 313

    1. Clean with a wet soft cloth. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If soap is used, wipe clean with a clean damp cloth. 2. Dry with a soft cloth. Seat belt maintenance do not bleach, dye or clean the belts with chemical solvents or abrasive cl...

  • Page 314

    Warning! (continued) • if the replaced fuse blows again, contact an autho- rized dealer. • if a general protection fuse for safety systems (air bag system, braking system), power unit systems (engine system, gearbox system) or steering system blows, contact an authorized dealer. Underhood fuses the ...

  • Page 315

    Cavity maxi fuse mini fuse description f01 60 amp blue – body controller f02 40 amp orange – rear power windows, fog lamps, front heated seats (if equipped) f02 30 amp green – rear power windows, front heated seats (if equipped) f02 30 amp green – fog lamps, front heated seats (if equipped) f02 20 a...

  • Page 316

    Cavity maxi fuse mini fuse description f20 – 30 amp green rear defroster f21 – 5 amp tan key unlock f22 – 10 amp red primary ecm loads f23 – 20 amp yellow bsm system f24 – 5 amp tan bsm system, positive key and steering angle sensor f30 – 15 amp blue 2nd instrument panel power outlet f83 20 amp yell...

  • Page 317

    Interior fuses the interior fuse panel is part of the body control module (bcm) and is located on the driver’s side under the instrument panel. Fuse panel cover 7 maintaining your vehicle 315.

  • Page 318

    Fuse panel cavity locations 316 maintaining your vehicle.

  • Page 319

    Cavity mini fuse description f53 5 amp beige kl 30 (+30) - ipc f38 20 amp yellow central doors locking f36 10 amp red kl 30 (+30) - tpms, eobd, hvac, radio f43 15 amp blue bi-directional washer pump f48 20 amp yellow passenger power windows f50 7.5 amp brown kl 15 (+15) - air-bag f51 7.5 amp brown k...

  • Page 320

    Central unit fuse panel the central power fuse panel is located on the driver’s side under the instrument panel. Cavity mini fuse description f1 10 amp red front heated seat passenger f2 10 amp red front heated seat driver f3 20 amp yellow rear power window driver side f4 20 amp yellow rear power wi...

  • Page 321

    Vehicle storage if you are leaving your vehicle dormant for more than 21 days, you may want to take these steps to protect your battery. • disconnect the negative cable from the battery. • anytime you store your vehicle, or keep it out of service (e.G., vacation) for two weeks or more, run the air c...

  • Page 322

    Exterior bulbs lamps bulb number front low beam headlamp h11 front high beam headlamps hb3 front side marker lamps led (see your authorized dealer) front parking/daytime running lamps w21w front turn signal lamps wy21w rear stop lamp p21w rear turn signal lamps py21w rear tail lamps p21/5w rear side...

  • Page 323

    Bulb replacement note: lens fogging can occur under certain atmospheric conditions. This will usually clear as atmospheric condi- tions change to allow the condensation to change back into a vapor. Turning the lamps on will usually accelerate the clearing process. Exterior bulbs note: lens fogging c...

  • Page 324

    Front/rear side marker lamps to change the bulb, proceed as follows: the front/rear side marker lamps are led and not ser- viced separately. See your authorized dealer for replace- ment of these lights. Rear tail, stop, backup and turn signal lamps the rear light clusters contain taillight, brake li...

  • Page 325

    Interior bulbs dome lamp with spot lights to change the bulbs, proceed as follows: 1. Remove dome lamp by depressing the tabs located by the arrows, using a suitable tool. 2. Open protective cover. 3. Replace the bulbs releasing them from the side contacts making sure that the new bulbs are correctl...

  • Page 326

    Rear roof lamp to change the bulb, proceed as follows: 1. Remove roof lamp by depressing the tabs located by the arrows, using a suitable tool. 2. Open the cover. 3. Replace the bulb releasing them from the side contacts making sure that the new bulbs are correctly secured between the contacts. Roof...

  • Page 327

    4. Close the protective cover and reposition it back into its housing, making sure that it locks into place. Roof lamp (reverse side) 1 — bulb 7 maintaining your vehicle 325.

  • Page 328

    Fluid capacities u.S. Metric fuel (approximate) 2.4l engine 16 gallons 60.5 liters engine oil with filter 2.4 liter engine (sae 0w-20, api certified) 5.5 quarts 5.2 liters cooling system* 2.4 liter engine (mopar antifreeze/ engine coolant 10 year/150,000 mile formula) 7.2 quarts 6.8 liters * include...

  • Page 329

    Fluids, lubricants, and genuine parts engine component fluid, lubricant, or genuine part engine coolant we recommend you use mopar antifreeze/coolant 10 year/150,000 mile formula oat (organic additive technology) or equivalent meeting the requirements of fca material standard ms.90032. Engine oil – ...

  • Page 330

    Caution! • mixing of engine coolant (antifreeze) other than specified organic additive technology (oat) en- gine coolant (antifreeze), may result in engine dam- age and may decrease corrosion protection. Organic additive technology (oat) engine coolant is differ- ent and should not be mixed with hyb...

  • Page 331

    Chassis component fluid, lubricant, or genuine part automatic transmission use only mopar zf 8&9 speed atf automatic transmission fluid, or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. Brake master cylinder we recommend you use mopar dot 4...

  • Page 333: Maintenance Schedules

    Maintenance schedules contents 䡵 maintenance schedule . . . . . . . . . . . . . . .332 ▫ maintenance chart . . . . . . . . . . . . . . . . . . . . . .333 8.

  • Page 334

    Maintenance schedule your vehicle is equipped with an automatic oil change indicator system. The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Based on engine operation conditions, the oil change indicator message will illuminate. This...

  • Page 335

    Maintenance chart required maintenance intervals refer to the maintenance schedules on the following page for the required maintenance intervals. At every oil change interval as indicated by oil change indicator system: • change oil and filter • rotate the tires rotate at the first sign of irregular...

  • Page 336

    Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 or years: 2 3 4 5 6 7 8 9 10 11 12 13 14 15 or kilometers: 32,000 48,000 64,000 80,000 96,000 1 12,000 128,000 144,000 160,000 176,000 192,000 208,0...

  • Page 337

    * change engine air filter every 10,000 miles (16,000 km) if operated in dusty and off road environment. ** the brake fluid must be changed every 24 months. This interval is time based only, mileage intervals do not apply. *** the spark plug change interval is mileage based only, yearly intervals do...

  • Page 339: Contents

    If you need consumer assistance contents 䡵 suggestions for obtaining service for your vehicle . . . . . . . . . . . . . . . . . . . .338 ▫ prepare for the appointment . . . . . . . . . . . . . .338 ▫ prepare a list . . . . . . . . . . . . . . . . . . . . . . . . .338 ▫ be reasonable with requests . ...

  • Page 340

    Suggestions for obtaining service for your vehicle prepare for the appointment if you are having warranty work done, be sure to bring the right papers with you, as well as your warranty folder. All work to be performed may not be covered by the warranty. Discuss additional charges with the service m...

  • Page 341

    Any communication to the manufacturer’s customer center should include the following information: • owner’s name and address • owner’s telephone number (home and office) • authorized dealer name • vehicle identification number (vin) • vehicle delivery date and mileage fca usa llc customer center p.O...

  • Page 342

    Customer assistance for the hearing or speech impaired (tdd/tty) to assist customers who have hearing difficulties, the manufacturer has installed special tdd (telecommunica- tion devices for the deaf) equipment at its customer center. Any hearing or speech impaired customer, who has access to a tdd...

  • Page 343

    Warning! Engine exhaust (internal combustion engines only), some of its constituents, and certain vehicle compo- nents contain, or emit, chemicals known to the state of california to cause cancer and birth defects, or other reproductive harm. In addition, certain fluids con- tained in vehicles and c...

  • Page 344

    In canada if you believe that your vehicle has a safety defect, you should contact the customer service department imme- diately. Canadian customers who wish to report a safety defect to the canadian government should contact trans- port canada, motor vehicle defect investigations and recalls at 1-8...

  • Page 345: Index

    Index 10

  • Page 346

    Adding engine coolant (antifreeze) . . . . . . . . . . . . .300 additives, fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . .237 air bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 air bag operation . . . . . . . . . . . . . . . . . . . . . . . . .42 driver knee a...

  • Page 347

    Brake assist system . . . . . . . . . . . . . . . . . . . . . . . . .203 brake fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .329 brake, parking. . . . . . . . . . . . . . . . . . . . . . . . . . . . .200 brake system . . . . . . . . . . . . . . . . . . . . . . . . . .202, 303 an...

  • Page 348

    Coolant pressure cap (radiator cap). . . . . . . . . . . . .301 cooling system . . . . . . . . . . . . . . . . . . . . . . . . . . . .298 adding coolant (antifreeze) . . . . . . . . . . . . . . . . .300 coolant capacity . . . . . . . . . . . . . . . . . . . . . . . . .326 coolant level . . . . . . ....

  • Page 349

    Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .278 emission control system maintenance. . . . . . . . . . . .287 engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .285 air cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . .292 block heater ...

  • Page 350

    Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .235 additives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .237 clean air . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .236 ethanol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .236 f...

  • Page 351

    Instrument cluster. . . . . . . . . . . . . . . .122, 123, 134, 149 instrument cluster display instrument cluster display . . . . . . . . . . . . . . . . . .124 instrument panel and controls. . . . . . . . . . . . . . . . .121 instrument panel lens cleaning . . . . . . . . . . . . . . . .310 interio...

  • Page 352

    Lubrication, body . . . . . . . . . . . . . . . . . . . . . . . . . .295 lug nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .255 maintenance free battery . . . . . . . . . . . . . . . . . . . . .292 maintenance procedures. . . . . . . . . . . . . . . . . . . . . .289 maintenance ...

  • Page 353

    Outside rearview mirrors . . . . . . . . . . . . . . . . . . . . .79 overheating, engine . . . . . . . . . . . . . . . . . . . . . . . .254 owner’s manual (operator manual) . . . . . . . . . . .4, 342 paint care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .306 parking brake . . . . ...

  • Page 354

    Automatic locking retractor (alr) . . . . . . . . . . . .36 energy management feature . . . . . . . . . . . . . . . . .35 lap/shoulder belt operation . . . . . . . . . . . . . . . . .31 lap/shoulder belts . . . . . . . . . . . . . . . . . . . . . . . .29 lap/shoulder belt untwisting . . . . . . . . ...

  • Page 355

    Engine fails to start . . . . . . . . . . . . . . . . . . . . . .187 steering power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .199 tilt column . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 wheel, tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 ste...

  • Page 356

    Traction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196, 197 traction control . . . . . . . . . . . . . . . . . . . . . . . . . . .204 trailer towing. . . . . . . . . . . . . . . . . . . . . . . . . . . . .242 cooling system tips . . . . . . . . . . . . . . . . . . . . . .251 hitches...

  • Page 357

    Windshield wiper blades . . . . . . . . . . . . . . . . . . . . .295 windshield wipers . . . . . . . . . . . . . . . . . . . . . . . . . .96 wiper blade replacement. . . . . . . . . . . . . . . . . . . . .295 wrecker towing . . . . . . . . . . . . . . . . . . . . . . . . . . .278 10 index 355.

  • Page 358

    Installation of radio transmitting equipment special design considerations are incorporated into this vehicle’s electronic system to provide immunity to radio frequency signals. Mobile two-way radios and telephone equipment must be installed properly by trained person- nel. The following must be obs...

  • Page 359

    2017 promaster cit y* stick with the specialists ® third edition printed in u.S.A. ©2016 fca us llc. All rights reserved. Ram is a registered trademark of fca us llc. 17vm-126-ac p r o m a s t e r c i t y o w n e r ’ s m a n u a l 2 0 1 7.