Ramsey Electronics ICI1 Assembly And Instruction Manual - page 9
ICI1 Page 9
PARTS SUPPLIED WITH YOUR ICI1 KIT
Capacitors
2 10 pF ceramic capacitors (Marked 10 or 10K) (C1,8)
4 0.1 µF ceramic capacitors (Marked 104) (C2,3,6,7)
1 10 µF electrolytic capacitor (C5)
1 1000 µF electrolytic capacitor (C4)
Resistors
1 10 ohm resistor (brown-black-black) (R13)
4 100 ohm (brown-black-brown) (R14,15,16,17)
1 220 ohm resistor (red-red-brown) (R5)
5 1K ohm resistors (brown-black-red) (R1,2,3,4,20)
6 10K ohms (brown-black-orange) (R7,8,9,10,11,12)
1 1M ohm resistor (brown-black-green) (R18)
Semiconductors and Integrated Circuits
5 1N4002 Rectifier Diode (Black body with white stripe marked 4002)
(D1,2,3,4,6)
5 2N3904 NPN transistor (Marked 2N3904) (Q1,2,3,4,5)
1 78L05 5V Voltage Regulator (Marked 78L05 in transistor-like
package)
(VR1)
1 68HC908JK1 Pre-programmed microcontroller (U1)
1 IR Sensor Module (U2 or U3, see instructions)
1 Large Green LED (D5)
Miscellaneous Components
1 20 pin IC socket for microcontroller U1
4 2 screw terminal jack (J1,2,3,4)
1 2.1 mm DC power jack (J7)
5 2-pin
headers
(J9,10,11,12,13)
5 Jumper
Blocks
1 DPDT PC mount pushbutton switch (S1)
1 Mini toggle pushbutton switch (S2)
4 9 Volt Relay (K1,2,3,4)
1 9.8304 MHz crystal (Marked 9.8304) (X1)
1 Mini-speaker
(SP1)