Ramsey Medical statMAP Instructions Manual - page 8
Page 8
PRECAUTIONS FOR USE (CON’T)
The statMAP is designed to conform to Electromagnetic
Compatibility (EMC) standard EN 60601-1-2, 2001 and
will operate accurately in conjunction with other medical
equipment which also meets this requirement. To avoid
interference problems affecting the statMAP, do not use
it in the presence of equipment which does not conform
to these specifications.
There is potential for radio/television interference.
statMAP has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. The product generates, uses, and
can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If the product does cause harmful
interference to radio or television reception, which can be
determined by turning the product on and off, the user is
encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the product and
receiver.
Consult the dealer or an experienced radio/TV
technician for help.
Inaccurate readings may result
when an electrosurgical unit
(ESU) is used while monitoring
with the statMAP. If this is
suspected, discontinue use of the statMAP in semi-
automatic mode while the (ESU) is in use and use the
alternate manual mode for blood pressure measurement.