Ramsond R55GWi Instructions Manual - Operation Instructions
Each time MODE button is pressed, the operation mode
is changed in sequence:
Each time the "FAN" button is pressed, the fan speed is
changed in sequence:
61°F ~ 86°F(16
℃
~30
℃
)
Heating mode is NOT available for cooling only air conditioner.
HEATING
COOLING
DRY
FAN ONLY
Selecting mode
FAN mode
At "FAN ONLY" mode, the "Auto" is not available.
At "DRY" mode, Fan speed is set at "AUTO” automatically, "FAN" button
is ineffective in this case.
Setting temperature
Press once to lower temperature setting by 1
°F(1℃)
Press once to raise temperature setting by 1
°F(1℃)
Range of available set temperature
*HEATING, COOLING
DRY
-7 ~ 7
unable to set
Turning on
SWING, SMART, TIMER ON, TIMER OFF, CLOCK,
HEATING, SLEEP and SUPER operation modes
will be specified in the following pages.
8
°
Press button, when the appliance receives the
signal, the RUN indicator of the indoor unit lights up.
Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
Wait 3 minutes before restarting the appliance.
During heating operation, air flow is not discharged at the beginning. After 2-5 minutes, the air flow will be discharged
until temperature of indoor heat exchanger rises.
FAN ONLY
Operation instructions
3
Operation modes
ON/OFF
MODE
FAN
SLEEP
SUPER
SMART
IFEEL
DIMMER
TIMER ON
TIMER OFF
CLOCK
SWING
SWING
MUTE
ON
OFF
ON
OFF
8
8
HEAT
1
4
2
Note:
”
together for 3 seconds will alternate the temperature display
between the ℃ and °F scale.
Note: Heating mode is NOT available for cooling only models.
Note: At “Dry” mode, the unit can decrease or rise 7°F by remote
controller if you feel uncomfortable.
Press and hold “ MODE” button and “ button
Auto
Higher
High
Medium
Low
Lower
3