Ramsond R55GWi Instructions Manual - Operation Instructions
Indoor temperature
SMART button is ineffective in SUPER mode.
Target temperature
70
)
°F(21℃
or below
72
)
°F(22℃
79°F(26℃)
Over 79°F(26℃)
70°F
°F(21℃~23℃)
-73
73
-79
°F
°F(23℃~26℃)
Your feeling
What you can do in SMART mode
button
adjustment procedure
Operation mode
HEATING
FAN ONLY
DRY
Room temperature
decrease 2°F
after
operate for 3 minutes
COOLING
Press the SMART button, the unit enters SMART mode(fuzzy logic operation) directly regardless of
the unit is on or off. In this mode, temperature and fan speed are automatically set based on the
actual room temperature.
Uncomfortable
because of
unsuitable air
flow volume.
Uncomfortable
because of
unsuitable flow
direction.
Indoor fan speed alternates among
Higher, High, Medium, low and Lower
each time this button is pressed.
Press it once, the vertical adjustment louver
swings to change vertical airflow direction.
Press it again, swings stops.
For horizontal airflow direction, please
refer to the previous page for details.
Operation mode and temperature are determined by indoor temperature
Note: Temperature, airflow and direction are controlled automatically in SMART mode.
However, for the inverter you can choose from -7 to 7.If you still feel uncomfortable.
Operation instructions
5
SMART mode
Heat pump models
Cooling only models
CLOCK button
You can adjust the real time by pressing CLOCK button, then
using and buttons to get the correct time, press
CLOCK button again the real time is set.
Indoor temperature
Target temperature
73
)
°F(23℃
or below
79°F(26℃)
Over 79°F(26℃)
73°F
°F(23℃~26℃)
-79
Operation mode
FAN ONLY
DRY
Room temperature
decrease 2°F(2℃
)
after
operate for 3 minutes
COOLING
FAN
SWING
SWING
Press MODE button cancel SMATR mode.
ON/OFF
MODE
FAN
SLEEP
SUPER
SMART
IFEEL
DIMMER
TIMER ON
TIMER OFF
CLOCK
SWING
SWING
MUTE
ON
OFF
ON
OFF
8
8
HEAT