Automixer am 2.
Risk of electric shock do not open caution to reduce the risk of electrical shock, do not open the unit. No user serviceable parts inside. Refer servicing to qualified service personnel. The symbols shown below are internationally accepted symbols that warn of potential hazards with electrical produ...
Manual-1 am2 automatic mixer operators manual wear parts: this product contains no wear parts. Quick start if you’re setting up the am2 automixer, then this quick start is for you. It’s intended to get your audio working quickly in just 422 words. Plug microphones into the mic inputs using standard ...
Manual-2 front panel description 1 mic input level controls adjust the mic input gain. The green signal indicators inform of audio presence. Overload indicators warn of excessive signal levels. 2 main output level control adjusts the level of the mix exiting the xlr output and the rad port output. W...
Manual-3 rear panel description 1 ac power iec input accepts electrons to power up the am2. Though it is first in this list, it’s best to connect it last. 2 fault indicator lights when something goes awry. Locate indicator flashes when toggled from the mongoose tracker or halogen software. When usin...
Manual-4 connection connect the ac power cord last to avoid loudspeakers hurting your sensitive ears. Mic inputs the eight mic jacks are balanced xlr inputs. Unbalanced mics or wiring can also be used with their inherent lower quality and higher potential for hum and noise. Standard microphone cable...
Manual-5 mic inputs the rear panel, three position switch sets the appropriate gain for condenser, dynamic and wireless microphones as well as select- ing phantom power for condenser microphones. The mic inputs are automatically mixed using a gain-sharing algorithm. Set the inputs using the black kn...
Manual-6 ©rane corporation 10802 47th ave. W., mukilteo wa 98275-5000 tel 425-355-6000 fax 425-347-7757 web rane.Com 112243 cascade out / rad port this port functions as a cascade out port when con- nected to the cascade in port of a rane am1 or am2 (sold separately). Connect the cascade out port of...
