Rane SIXTY-ONE Owner's Manual - Sixty-One

Other manuals for SIXTY-ONE: Operator's Manual, Operator's Manual

Summary of SIXTY-ONE

  • Page 1

    Owner’s manual sixty-one rane sixty-one mixer manual.

  • Page 2: Sixty-One

    Owner’s manual 2 sixty-one attention: risque de chocs electrique - ne pas ouvrir risk of electric shock do not open caution to reduce the risk of electrical shock, do not open the unit. No user serviceable parts inside. Refer servicing to qualified service personnel. The symbols shown below are inte...

  • Page 3: Sixty-One

    Owner’s manual 3 sixty-one attention: risque de chocs electrique - ne pas ouvrir risk of electric shock do not open caution afin d’éviter tout risque de choc électrique, ne pas ouvrir l’appareil. Aucune pièce ne peut être changée par l’utilisateur. Contactez un sav qualifié pour toute intervention. ...

  • Page 4: Sixty-One

    Owner’s manual 4 sixty-one copyright notices ©2014 rane corporation. All rights reserved. Serato dj and scratch live are trademarks of serato. Trademarked in the united states and other countries. This software is based in part on the work of the independent jpeg group, and uses libpng code, copyrig...

  • Page 5: Sixty-One

    Owner’s manual 5 sixty-one contents 2 important safety instructions 4 check list 6 quick start: software 6 serato dj software installation for mac osx 6 serato dj software installation for windows 6 serato scratch live 6 other dj and daw programs 7 quick start: hardware 7 analog inputs 8 analog outp...

  • Page 6: Sixty-One

    Owner’s manual 6 sixty-one quick start: software before using your mixer, at least read this short section for the basics. Read the complete manual to get the best investment from your new sixty-one. This section will help get you started with one computer. Serato dj software installation for mac os...

  • Page 7: Sixty-One

    Owner’s manual 7 sixty-one main out phono grounds analog input select session 100-240v 50/60 hz 15 watts made in u.S.A. Rane corp. Flexfx loop usb out in 2 1 4 3 2 1 4 3 ph cd ph cd ph cd ph cd mic line mic input acn 001 345 482 usb cd or turntable out cd or turntable out main speakers or amps power...

  • Page 8: Sixty-One

    Owner’s manual 8 sixty-one analog outputs • main out is on a pair of balanced ¼˝ trs (tip-ring-sleeve) jacks. • session out is available on a pair of unbalanced rca jacks. • headphones output mix is available on both ¼˝ and 3.5 mm jacks. The main and session outputs arrive from the same “main mix” s...

  • Page 9: Sixty-One

    Owner’s manual 9 sixty-one how to calibrate serato dj with music playing in the background through your system or booth output, put your needle on the record with the turntable stopped. If you are using cd players, the same rules apply. Have the cd deck paused or stopped while calibrating. Click and...

  • Page 10: Sixty-One

    Owner’s manual 10 sixty-one sixty-one overview • includes serato dj software. • includes rane asio and core audio drivers for serato dj and other audio programs. • the usb 2.0 port supports six stereo record and four stereo playback channels. • record channels support: • control signal for two virtu...

  • Page 11: Sixty-One

    Owner’s manual 11 sixty-one sixty-one connections power supply this mixer features an internal universal switching power supply that operates on any ac mains 100 to 240 vac, 50 or 60 hz (most places in the world). The universal supply is a major plus for the traveling dj, who only needs the right ie...

  • Page 12: Sixty-One

    Owner’s manual 12 sixty-one usb audio there are six stereo record channels and four stereo playback channels, plus a stereo channel for effects send from the mixer. Rane asio and core audio drivers allow the sixty-one to act as a 12-record 8-playback usb sound card for use with serato dj and other p...

  • Page 13: Sixty-One

    Owner’s manual 13 sixty-one deck input channels two deck channels, or buses, have nearly identical controls with the exception of the source selectors. Source selector the source selector for deck 1 selects one of four sources: • ph / cd 1 (thru): set to ph or cd with the rear panel switch. • when s...

  • Page 14: Sixty-One

    Owner’s manual 14 sixty-one filter the filter sweeps from low-pass to high-pass. Set to 12 o’clock for a flat frequency response. Moving the filter toward the low position progressively reduces high-frequencies. Moving the filter toward the high position progressively reduces low-frequencies. The re...

  • Page 15: Sixty-One

    Owner’s manual 15 sixty-one mic input this mic input on a xlr/trs combo jack has level, high and low tone controls, flexfx assign and a meter. Select mic or line level using the rear panel switch. Line is usually correct for wireless mic receivers. The mic is off when the level control is at “ 0”. S...

  • Page 16: Sixty-One

    Owner’s manual 16 sixty-one flexfx the flexfx bus in the sixty-one works differently than a typical effects insert loop. This architecture is very flexible and opens up many new possibilities not possible with simple effect insert designs found on other mixers. The flexfx bus is more like an auxilia...

  • Page 17: Sixty-One

    Owner’s manual 17 sixty-one rane drivers the serato dj installer includes core audio (mac) and asio (pc) drivers that allow your rane sixty-one to use other popular dj and daw audio applications. Once installed, you will have the option to select the sixty-one’s inputs and outputs in the audio setti...

  • Page 18: Sixty-One

    Owner’s manual 18 sixty-one deck inputs 1-2 page controls: each deck panel controls these functions: • analog input source: each input may be set to line level (cd) or phono level (ph) using a switch on the rear of the mixer. Ph/cd 1 and ph/cd 2 are associated with deck 1. Ph/cd 3 and ph/cd 4 are as...

  • Page 19: Sixty-One

    Owner’s manual 19 sixty-one midi mapping when using serato dj software, the mixer is plug- and-play with all required midi mapping done for you. For advanced users or users using 3rd party daws, it is possible to custom midi-map most mixer controls on the sixty- one. 34 31 91 36 17 37 35 68 67 70 4 ...

  • Page 20: Sixty-One

    Owner’s manual 20 sixty-one midi implementation serato dj midi control only supports: • note on/off • standard 7-bit cc (control change) midi note on/off chart note on/off midi controls are associated with mixer functions and restricted to midi out only. A user is unable to control mixer functions v...

  • Page 21: Sixty-One

    Owner’s manual 21 sixty-one midi control change chart midi control changes initiated by the mixer are dedicated to mixer functions and read only. Midi out messages may be used to trigger or control external software functions. The mixer can receive midi in control changes for usb record sources, pho...

  • Page 22: Sixty-One

    Owner’s manual 22 sixty-one 78 0x4e deck 2 mid 0-127 0x00-0x7f 82 0x52 mic low 0-127 0x00-0x7f 83 0x53 deck 1 fader 0-127 0x00-0x7f 84 0x54 deck 2 fader 0-127 0x00-0x7f 87 0x57 session out level 0-127 0x00-0x7f 89 0x59 deck 1 level 0-127 0x00-0x7f 90 0x5a deck 2 level 0-127 0x00-0x7f 93 0x5d main le...

  • Page 23: Sixty-One

    Owner’s manual 23 sixty-one magnetic fader maintenance the faders and crossfader in the sixty-one are designed with materials highly resistant to corrosion and most chemicals. While they will handle millions of operations, they may become dirty over time. Bad things may be spilled into a fader, but ...

  • Page 24: Sixty-One

    Owner’s manual 24 sixty-one sensors fader calibration after cleaning or replacement, the sensors may get moved, affecting the contour. After any fader service, perform this procedure to re-calibrate the faders and crossfader. 1. Power off the sixty-one. 2. Move all faders to the center-most position...

  • Page 25: Sixty-One

    Owner’s manual 25 sixty-one technical specifications sixty-one specifications all specifications typical unless otherwise stated analog inputs 4 stereo unbalanced rca jacks …...Phono or line level input rear panel switches for each input …...Phono response riaa ±1 db, gain: 31 db at 1 khz …...Max ph...

  • Page 26: Sixty-One

    Owner’s manual 26 sixty-one declaration of conformity application of council directives: 2001/95/ec 2002/96/ec 2004/108/ec 2006/95/ec 2011/65/eu manufacturer: rane corporation 10802 47th avenue west mukilteo wa 98275-5000 usa this equipment has been tested and found to be in compliance with all appl...

  • Page 27: Sixty-One

    Owner’s manual 27 sixty-one limited warranties factory authorized service your unit may someday need to be serviced by the rane factory if you live in the usa. International customers should contact your dealer or distributor for service. You must call the rane factory before shipping. Please do not...

  • Page 28: Sixty-One

    Owner’s manual 28 sixty-one warranty procedure - valid in u.S.A. Only notice! You must complete and return the warranty card or register your product online to extend the warranty from 2 years to 3 years! To validate your extended warranty: use the postcard that came in the box with your unit, or go...