Range Bem User Manual - page 5
8
9
8
9
Getting started
We know you’re excited to experience your new Strum
speaker. And you should be. Luckily, these two easy steps will
get you up and running in no time.
Step 1: Charge It
Connect your Strum Speaker to a wall outlet using the USB
AC adaptor or to a PC/laptop using the USB charging cable.
The red LED with light during charging and turn off when fully
charged. Please allow approximately 2 hours to fully charge.
Step 2: Connect it
Bluetooth
When your Strum Speaker is fully charged or plugged into
a wall outlet or PC, pair it with your smartphone or other
Bluetooth capable device.
1. Press the VOLUME knob to turn on the speaker. A tone will
sound and a blue LED will flash rapidly beneath the Bluetooth
symbol.
2. Activate Bluetooth on your smartphone or other Bluetooth
capable device (refer to your device user guide for details).
Your smartphone/device will now begin searching for
Bluetooth devices.
3. When your smartphone/device finishes searching, select
“Strum Speaker” from the device list. When connected, the
blue LED will flash slowly.
After initial pairing, “Strum Speaker” will appear in your device
list. Simply select the device from the list to connect.