Range Bem User Manual - page 6
10
11
10
11
Getting started (cont)
Auxiliary
Your Strum can also connect to audio devices that are not
Bluetooth enabled. Connect your device to Strum using an
auxiliary (AUX) cable (not included) by inserting one end of
the plug into the AUX IN port on Strum and the other end into
your device as specified.
NOTE: Bluetooth must be activated on your device to connect
with Strum.
Operation details
The below instructions will help you get the most use out of
your Strum speaker.
Power on / off :
Press the VOLUME knob to turn on/off the speaker. When turning
on, a tone will sound and a flashing blue LED will flash rapidly
beneath the Bluetooth symbol. When connected with a Bluetooth
device, the blue LED will flash slowly.
Audio Controls
Sound changes from artist to artist, album to album, and
sometimes even track to track. With the volume, bass, and treble
adjustments on Strum, you can get the best sound possible.
Volume
Turn the VOLUME knob to adjust the volume (clockwise
increases volume, counterclockwise decreases volume).