Rangemaster Toledo 90 Gas Installation And User Manual - page 24

24

You will need the following equipment to complete the

cooker installation satisfactorily

You will also need the following tools:

1. Electric drill

2. Masonry drill bit

(only required if fitting the cooker on a stone or concrete floor)

3. Rawlplugs

(only required if fitting the cooker on a stone or concrete floor)

4. Steel tape measure

5. Cross head screwdriver

6. Flat head screwdriver

7. 4mm & 3mm Allen keys

8. Spirit level

9. Pencil

10. Adjustable spanner

11. Screws for fitting stability bracket

STABILITY BRACKET

If the cooker is to be

supplied with gas through

a flexible hose, a stability

bracket or chain must be

fitted.

These are not supplied

by with the cooker but

are available at most

builders merchants.

GAS PRESSURE

TESTER

FLEXIBLE GAS HOSE

Must be in accordance

with the relevant

standards. For LP Gas it

should be suitable for

LPG, capable of 50mbar

pressure, 70°C

temperature rise and carry

a red stripe, band or label

MULTIMETER

(for electrical checks)