Ranger Body Scanner/ Metal Detector Owner's Manual - page 8
8
CHARGING A NICKEL-CADMIUM BATTERY
You must charge a rechargeable nickel-cadmium battery before you can use it to power the
security wand. To charge it in the security wand, you need an AC adapter. AC adapters are
available from Ranger Security.
Warning:. Do not try to recharge alkaline or other non-rechargeable batteries. They might
explode.
Caution:.The AC adapter must supply 12 volts DC, its center tip must be set to positive, it
must deliver at least 10 milliamps, and its plug must correctly fit the security wand's recharger/
earphone jack. The recommended Radio Shack AC adapter meets these requirements. Using
an AC adapter that does not meet these requirements could damage the security wand or the
AC adapter.
Important:.Your Body Scanner is capable of using a rechargeable nickel-cadmium battery. At
the end of the battery's useful life, it must be recycled or disposed of properly. Contact your
local, county or state hazardous waste management authorities for information on recycling or
disposal programs in your area. Some options that might be available are municipal curbside
collection, drop-off boxes at retailers, recycling collection centers, and mail-back programs.
hh_2007356.indd 8
1/29/2007 1:38:46 PM