Rapid 5050e Operator's Manual - page 3
31
GB
INTRODUCTION
This Operator’s Manual describes the Rapid 5050e and 5080e.
Read the operator’s manual carefully before using the machine.
The manual contains safety regulations and descriptions of checks on parts
which are critical for safety, together with directions for the correct use and
maintenance of the machine. The figures can be found on the cover fold-out.
SAFETY REGULATIONS
-
The machine may only be used by personnel with knowledge of the
safety regulations and correct handling as described in this manual.
-
The machinemust only be used with the supplied adapter, Rapid 5050e/
5080e, only.
-
The visor must be mounted at the machine when stapling.
-
Only the papers (or other objects) to be stapled should be put into
position under the visor.
-
It must not be possible to staple without the visor mounted. Check on this
every day as described in the section “Checking safety functions”.
-
The machine must be turned off before it is moved.
-
The machine must be connected to an electric socket which has a
protective earth.
-
The machine must not be subjected to moisture. It must not be located in
a position where rain or splashes of water can fall on it.
-
Repairs and other measures, besides those described in this manual,
must be carried out by service personnel authorised by Isaberg AB, its
companies or agents.
-
Repair of faults or damage to the machine or its electrical connection
must be carried out by authorised service personnel.
SYMBOLS
Symbols in this manual
Read the operator’s manual carefully and make sure you underst-
and it properly before using the machine.
Warning text. Information critical for safety follows after this
symbol.
Inlaga00AA
00-06-06, 11.26
31