Raptor OW1.7-VS-CL-S User Manual - page 4
OW1.7-VS-CL-S / USER MANUAL REV1
November 2017
4
2.
SPECIFICATION
2.1
Camera Specification
The Owl 320 High Speed digital camera is designed for high-resolution applications requiring visible to
SWIR imaging (400-1700nm). The Owl 320 High Speed camera uses an InGaAS sensor with a resolution
of 320 x 256 in a 14-bit digital output. High-speed low-noise electronics provide linear response and
sensitivity for rapid image capture.
The Camera Link digital interface provides the most stable platform for data transfer and the camera
will work on any Camera Link standard card.
A Software Development Kit (SDK) is available for interfacing with custom software.
Sensor Type
InGaAs PIN-Photodiode
Active Pixel
320 x 256
Pixel Pitch
30μm x 30μm
Active Area
9.6mm x 7.68mm
Spectral response1
0.4μm to 1.7μm
Noise (RMS) - Typical
<225 electrons High Gain
Quantum Efficiency
Peak >92% (>87% @ 1.064nm, 82% @ 1.55nm)
Pixel Well Depth - Typical
>150ke-
Pixel Operability
>99%
Digital Output Format
14 bit Camera Link (Base Configuration)
Exposure time
500ns to more than 500ms
Frame Rate
Up to 346Hz
Camera Setup / Control
CameraLink
Trigger interface
TTL trigger IN level
Power supply
12V DC ±10%
TE Cooling
ON / OFF
Image Correction
2 point NUC (offset & Gain) + pixel correction
Camera Power Consumption
< 5W without TEC
Operating Case Temperature
-20°C to +55°C
Storage Temperature
-30°C to +60°C
Dimensions & Weight
50mm x 50mm x 70mm / 250g
Latest version available on
www.raptorphotonics.com