Raritan Dominion LX Quick Setup Manual
Dominion LX Quick Setup Guide
1
QSG-LX-v2.6.0-0E-E
255-80-8010-00 RoHS
Dominion LX
Quick Setup Guide
Thank you for your purchase of the Dominion
®
LX. The LX is the industry's highest quality, most affordable digital KVM (Keyboard,
Video, Mouse) switch for your growing SMB business.
For details on using the LX, access online help from the application, or download help in PDF format from the
Support page
on
Raritan's website.
Package Contents
Each LX
™
ships as a fully-configured, stand-alone product in a
standard 1U 19" rackmount chassis. Each LX device ships
with the following contents:
1 - LX device
1 - Rackmount kit
1 - AC power cord
1 - LX Quick Setup Guide
1 - Application note
1 - Warranty card
QS Rule
In Raritan products that require Rack Mounting, please follow
these precautions:
Operation temperature in a closed rack environment may
be greater than room temperature. Do not exceed the
rated maximum ambient temperature of the appliances.
See Specifications in online help.
Ensure sufficient airflow through the rack environment.
Mount equipment in the rack carefully to avoid uneven
mechanical loading.
Connect equipment to the supply circuit carefully to avoid
overloading circuits.
Ground all equipment properly, especially supply
connections, such as power strips (other than direct
connections), to the branch circuit.
QS Rule
Rack Mounting
The LX can be mounted in 1U (1.73", 44 mm) of vertical
space in a standard 19" equipment rack. You can mount the
LX facing the front of the rack or facing the rear of the rack.
To rack-mount the LX, use the brackets and screws that came
with the device.
Forward Mount
The steps in the table correspond to the numbers shown in
the front rackmount diagrams.
1. Secure the cable-support bar to the back end of the side
brackets using two of the included screws.
2. Slide the LX between the side brackets, with its rear panel
facing the cable-support bar, until its front panel is flush
with the "ears" of the side brackets.
3. Secure the LX to the side brackets using the remaining
included screws (three on each side).
4. Mount the entire assembly in your rack and secure the
side brackets' ears to the rack's front rails with your own
screws, bolts, cage nuts, and so on.
5. When connecting cables to the rear panel of the LX, drape
them over the cable-support bar.