Raritan Dominion LX Quick Setup Manual - page 6
Dominion LX Quick Setup Guide
6
QSG-LX-v2.6.0-0E-E
255-80-8010-00 RoHS
http://IP-ADDRESS/akc for the Microsoft .NET-based
Active KVM Client
IP-ADDRESS is the IP address assigned to your LX
You can also use HTTPS, or the DNS name of the LX
assigned by your administrator (if applicable).
3. You are always redirected to the IP address from HTTP to
HTTPS.
4. Enter your username and password. Click Login.
Access and Control Target Servers Remotely
The LX Port Access page provides a list of all LX ports, as
well as the connected target servers, their status, and
availability.
Accessing a Target Server
To access a target server:
1. On the LX Port Access page, click the Port Name of the
target you want to access.
The Port Action Menu is displayed.
2. Choose Connect from the Port Action menu.
A KVM window opens with a connection to the target.
Switching between Target Servers
To switch between KVM target servers:
1. While already using a target server, access the LX Port
Access page.
2. Click the port name of the target you want to access. The
Port Action menu appears.
3. Choose Switch From in the Port Action menu. The new
target server you selected is displayed.
Disconnecting a Target Server
To disconnect a target server:
On the Port Access page, click the port name of the target
you want to disconnect from, then click Disconnect on Port
Action menu when it appears.
QS Rule
Step 6: Create and Install an SSL Certificate
Raritan strongly recommends you install your own SSL
Certificate in each LX device.
This security best practice reduces the number of Java
™
warning messages, and avoids man-in-the-middle attacks.
It also prevents future Java versions and browser versions
from blocking access to your LX device.
For information creating and installing SSL certificates, see
SSL Certificates in online help.
QS Rule
Resetting the Device (Optional)
Use the reset feature only if you want to reset the device to its
original factory settings.
Note: It is recommended that you save the audit log prior to
performing a factory reset. The audit log is deleted when a
factory reset is performed and the reset event is not logged on
the audit log.
To reset the device:
1. Power off the LX.
2. Use a pointed object to press and hold the Reset button.
3. While continuing to hold the Reset button, power the LX
device back on.
4. Continue holding the Reset button for 10 seconds.
QS Rule
Additional Information
For more information about the LX
®
and the entire Raritan
product line, see Raritan's website (www.raritan.com). For
technical issues, contact Raritan Technical Support. See the
Contact Support page in the Support section on Raritan's
website for technical support contact information worldwide.
Raritan's products use code licensed under the GPL and LGPL. You can request
a copy of the open source code. For details, see the Open Source Software
Statement at
(http://www.raritan.com/about/legal-statements/open-source-software-statement/)
on Raritan's website.