Raritan EMX Quick Setup Manual - page 10
EMX Quick Setup Guide
10
QSG-EMX-1A-v3.3.10-E 255-80-6106-00 RoHS
"dmesg" after connecting the EMX to the computer. Usually
the tty device is "/dev/ttyACM#" or "/dev/ttyUSB#," where # is
an integer number.
For example, if you are using the kermit terminal program,
and the tty device is "/dev/ttyACM0," perform the following
commands:
> set line /dev/ttyACM0
> connect
Additional Information
For more information about EMX and the entire Raritan
product line, see Raritan's website (www.raritan.com). For
technical issues, contact Raritan Technical Support. See the
Contact Support page in the Support section on Raritan's
website for technical support contact information worldwide.
Raritan's products use code licensed under the GPL and LGPL. You can request
a copy of the open source code. For details, see the Open Source Software
Statement at
(http://www.raritan.com/about/legal-statements/open-source-software-statem
ent/) on Raritan's website.