Raritan KX II Quick Setup Manual - page 8
Dominion KX II Quick Setup Guide
8
QSG-DKX2-v2.6.0-0O-E 255-62-4022-00-RoHS
Configure Date/Time Settings (Optional)
Optionally, configure the date and time settings.
The date and time settings impact SSL certificate validation if
LDAPS is enabled.
Use the Date/Time Settings page to specify the date and time
for KX II.
There are two ways to do this:
Manually set the date and time.
Synchronize the date and time with a Network Time
Protocol (NTP) server.
Choose Device Settings > Date/Time to open the Date/Time
Settings page.
1
Choose your time zone from the Time Zone drop-
down list.
2
Adjust for daylight savings time by checking the
"Adjust for daylight savings time" checkbox.
3
Choose the method to use to set the date and time:
User Specified Time - use this option to input the date
and time manually. For the User Specified Time
option, enter the date and time. For the time, use the
hh:mm format (using a 24-hour clock).
Synchronize with NTP Server - use this option to
synchronize the date and time with the Network Time
Protocol (NTP) Server.
4
For the Synchronize with NTP Server option:
Enter the IP address of the Primary Time server.
Enter the IP address of the Secondary Time server.
Optional
Note: If DHCP is selected for the Network Settings on
the Network page, the NTP server IP address is
automatically retrieved from the DHCP server by
default. Manually enter the NTP server IP address by
selecting the Override DHCP checkbox.
Click OK.
QS R ule
Step 5: Launching the KX II Remote Console
Log in to your KX II Remote Console from any workstation
with network connectivity that has Microsoft .NET
®
and/or
Java Runtime Environment
™
installed.
To launch the KX II Remote Console:
1. Launch a supported web browser.
2. Enter either:
The URL - http://IP-ADDRESS to use the Java-based
Virtual KVM Client
Or
http://IP-ADDRESS/akc for the Microsoft .NET-based
Active KVM Client
IP-ADDRESS is the IP address assigned to your KX II
You can also use HTTPS, or the DNS name of KX II
assigned by your administrator (if applicable).
3. You are always redirected to the IP address from HTTP to
HTTPS.
4. Enter your username and password. Click Login.
Access and Control Target Servers Remotely
The KX II Port Access page provides a list of all KX II ports,
as well as the connected target servers, their status, and
availability.
Access a Target Server from KX II
1
On the KX II Port Access page, click the Port Name of
the target you want to access. The Port Action Menu
is displayed.