Raritan PX Quick Setup Manual - page 2
2
Raritan PX Quick Setup Guide
QSG-DPX-0O-v1.5.
13-E y 255-80-6081-00 RoHS
=HUR86L]H
x
The PX device
x
Tool-less mounting bracket and bracket with screws
x
Null modem cable with RJ-45 and DB9F connectors
x
Quick Setup Guide
x
Warranty card
8DQG86L]H
x
The PX device
x
1U or 2U bracket pack and screws
x
Null modem cable with RJ-45 and DB9F connectors
x
Quick Setup Guide
x
Warranty card
QS Rule
%HIRUH 1. Prepare the installation site. Make sure the installation area is clean and not exposed to extreme temperatures or humidity. Allow sufficient space around the device for cabling and outlet connections. Safety instructions are provided in the PX online help or User Guide. 2. Fill out the Equipment Setup Worksheet found in the PX online help or User Guide. Record the model, serial number, and use of each IT device connected to the PX. QS Rule 0RXQWLQJWKH3; &LUFXLW%UHDNHU2ULHQWDWLRQ/LPLWDWLRQ Usually a PDU can be mounted in any orientation. However, when mounting a PDU with circuit breakers, you must obey these rules: x Circuit breakers CANNOT face down. For example, do not horizontally mount a Zero U PDU with circuit breakers on the ceiling. x If a rack is subject to shock in environments such as boats or airplanes, the PDU CANNOT be mounted upside down. If installed upside down, shock stress reduces the trip point by 10%. Note: If normally the line cord is down, upside down means the line cord is up. 0RXQWLQJ8RU80RGHOV 1. Attach two rackmount brackets to both sides of the PX with the provided screws. 2. Insert the cable-support bar into rackmount brackets. 3. Secure with the provided end cap screws. 4. Fasten the rackmount brackets' ears to the rack using your own fasteners. 0RXQWLQJ=HUR80RGHOV8VLQJ/%UDFNHWV 1. Align the baseplates on the rear of the PX.