Rasmussen DFC18-DFC1-R-N Assembly, Installation And Operation Instructions - page 7
ALL APPLICATIONS (VENTED and VENT FREE OPERATION)
LOG PLACEMENT
C1A, C1C, C1B, and C1D
1. 18" sets have 5 logs. 24" sets have six logs.
2.
Place largest log (FRONT LOG) in the front of the grate and the second largest log (REAR LOG) on the rear of the
grate behind the LOCATOR PINS. (Figures 5 and 6).
3.
Place both Right and Left LARGE TOP LOGs across the FRONT and REAR logs with the LOCATOR PINS
inserted into the drilled holes located on the bottom of both LARGE TOP LOGs. (Figures 5 and 6).
4.
Place (R) and (L) SMALL TOP LOGs (24 and 30" models) across the FRONT LOG and LARGE TOP LOGs.
To ensure optimum performance, logs must be placed on Burner as depicted.
Do not Allow Top Logs to Cross Flame Path.
v
Front Log
Rear Log
Locator
Pins
v
v
v
Locator
Pins
.
v
Top Log
Large (L)
Top Log
Large (R)
.
v
v
v
v
.
Top Log
Small (L)
Top Log
Small (R)
(24-30"
models)
TOP VIEW
FRONT VIEW
Front
Log
Rear Log
Top Log
Large (R)
Top Log
Large (L)
Top Log
Small (L)
Top Log
Small (R)
Front
Log
Rear Log
Top Log
Large (R)
Top Log
Small (R)
Top Log
Large (L)
Top Log
Small (L)
Main burner
(24" & 30"
sets)
(24" & 30"
sets)
Figure 5
Figure 6
WARNING: Failure to position parts in accordance with these diagrams
or failure to use only parts specifically approved with this heater
may result in property damage or personal injury.
DFC1 and DFC1C (Double Face)
1. Place the two largest logs (FRONT LOGS) between the grate log guide and the grate teeth. Figures 7 and 8.
2.
Place both LARGE TOP LOGs across the FRONT logs with the LOCATOR PINs inserted into the drilled hole
located on the bottom of both LARGE TOP LOGs. (Figures 7 and 8)
3.
Place the R and L SMALL TOP LOGs across the FRONT LOGs and Large TOP LOGs with LOCATOR PINS
inserted into the drilled holes located on the bottom of both SMALL TOP LOGs. (Figure 8)
TO ENSURE OPTIMUM PERFORMANCE, LOGS MUST BE PLACED ON BURNER AS DEPICTED.
DO NOT ALLOW SMALL TOP LOGS TO CROSS FLAME PATH.
7