RAVENMTICUBASE/NUENDOUSERMANUAL4
10.
Unplug this apparatus during lightning storms or when unused for long
periods of time.
11.
Do not press strongly on the panel with a hand or sharp object such
as a pencil, pen, or nail.
12.
Do not stick metal objects or conductive material in the device,
power chord, or power inlet.
13.
Make sure you connect the earth ground wire to prevent electric
shock. A cable with a three-pronged grounded AC Plug must be connected
to a three-pronged AC outlet.
Power Source
Operate your RAVEN MTi only from the power source included.
Power supply manufacturer: Lite-On Technology
Model: PA-1041-71
Electrical rating: INPUT 100-240 VAC, 50/60 Hz, 1.2A, OUTPUT: 12VDC, 3.33A
Moving
Make sure the product is turned off, unplugged, and all cables have been removed. It
will take a minimum of two people to move your RAVEN MTi, although three are
recommended.
Servicing
Servicing of the RAVEN MTi is to be done by qualified service personnel only. To
reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so.
Damage Requiring Service
Unplug the device from the power outlet and refer servicing to qualified service
personnel under the following conditions:
• When power supply is damaged
• If liquid has been spilled or objects have fallen into the RAVEN MTi.
• If your RAVEN MTi has been exposed to rain or water.
• If your RAVEN MTi has been dropped or damaged in any way.
• When your RAVEN MTi exhibits a distinct change in performance.