Raveon FireLine Ethernet Technical Manual - page 6
FireLine System Protocol Manual
6
Raveon Technologies Corp.
2.2.
Security Features
Network recurity-related features in Digi Connect devices include:
•
Secure access and authentication:
•
One password, one permission level. (Default user:
root
Default password: dbps )
•
Can issue passwords to device users.
•
Can selectively enable and disable IP services: network services such as ADDP,
RealPort, Encrypted RealPort, HTTP/HTTPS, LPD, Remote Login, Remote Shell,
SNMP, and Telnet, can be enabled and disabled.
Secure sites for configuration: HTML pages for configuration have appropriate
security.
• Encryption: Digi Connect devices include strong Secure Sockets Layer
(SSL) V3.0/
• Transport Layer Security (TLS) V1.0-based encryption: DES (56-bit),
3DES
• (168-bit), AES (128-/156-bit): Encrypted RealPort offers encryption for the
Ethernet connection between the
• COM/TTY port and the Digi Connect device: Wireless Digi Connect
devices provide Wi-Fi Protected Access (WPA) and
•
SNMP security: Authorization: Changing public and private community
names is recommended to prevent unauthorized access to the device.
You can disable SNMP set commands to make use of SNMP read-only.
2.3.
The Default Web Interface
A default web interface is provided as an easy way to configure and monitor Digi
Connect devices like the FireLine Ethernet modem. Configurable features are
grouped into several categories: Network, Serial Port, Alarms, Security, and
System. Most of the configurable features are arranged by most basic settings on
a page, with associated and advanced settings accessible from that page. As in
the Digi Device Setup Wizard, serial port configurations are classified into port
profiles, or configuration scenarios that allow you to select the scenario that best
represents the environment and set up the appropriate parameters that are
needed.
When configuring some features, you may want to establish a basic configuration
using the Digi Device Setup Wizard, and then fine-tune the configuration using
the default web interface.
2.4.
Using the Digi Discovery Program
The Digi Discovery Program is the preferred method of managing your FireLine
Ethernet products. It is an easy-to-use program that displays all Digi powered
devices, and with a few clicks, allows you to configure them. When you run the
Digi Discovery program called “dgdiscvr.exe”, the program will search for all Digi
devices, and display a list of them on your screen.