Ravo MP-10 Owner's Manual - Troubleshooting

Troubleshooting

● There is a lot of noise

      • Check the shielded cables you are using for defects.

      • Use only the HOTONE AC adapter.

      • Try to adjust the GATE module settings again.

108

● 

The unit will not turn ON

• Make sure the AC adapter is plugged in correctly.

• When using USB bus power, confirm the USB cable is connected correctly.

• When using batteries, make sure that they are still charged and the INPUT jack is plugged 

        in with cable.

●

No sound or very low volume

• Check the connections.

• Adjust the patch level.

• Adjust the master level.

• When adjusting the volume with an expression pedal, make sure that a suitable volume 

        setting has been set with the pedal.

• Confirm that unit is not in mute mode.

• The unit might have switched to standby to save power. In standby, audio input and 

       output are disabled.