Ravo MP-10 Owner's Manual - page 18
Manual is about: Guitar/Bass Multi-Effects Processor
of
114
● To set the unit to mute
After “BYPASS/TUNER” disappears and “MUTE TUNER” appears on the screen, release the
switches within one second.
Note:
•
If you continue to press both
[▼]/[▲]
footswitches for more than 2 seconds, the looper becomes active(
→
P18).
•
You cannot set the unit to bypass/mute from edit mode.
•
When you press both
[▼]/[▲]
footswitches at the same time, the footswitch that is momentarily pressed first could
change the tone in some cases. Please avoid making sound when pressing the switches.
16