Raymarine LifeTag System Operating Manual - page 7
LifeTag System Operating Guide
5
Replacing battery
Discard spent battery in
accordance with local
regulations
Do NOT use a sharp
object to open a Tag
Replace the Tag back
and snap shut
CR2 3V
Open the Tag
Remove spent
battery
Sn
ap
5.
4.
3.
D8284-1
Ensure correct
polarity
Important!
CR2 3V
1.
2.
Do NOT open a Tag in
wet or dirty conditions
Taking care not to disturb other internal
components, insert NEW, lithium,
non-rechargeable CR2 3V battery.
Looking after your LifeTag system
D8920-1
Never open a Tag unless you want to remove or replace the battery.
Periodically clean the Base Station and Tags, use a clean damp cloth. Do NOT use chemical or
abrasive cleaning agents.
Periocially clean the strap by washing it in fresh water and combing the velcro sections to
remove dirt, fluff etc.
If you are planning not to use the LifeTag system for an extended period (e.g. over winter),
remove the batteries from the Tags, to increase battery life.
Store all components in a dry location, out of direct sunlight , when not in use.
81275_1.book Page 5 Thursday, April 6, 2006 2:35 PM
Draft copy 06/04/06