Raymarine RAY50 Mounting And Getting Started - page 14
In-line fuse and thermal breaker ratings
The following in-line fuse and thermal breaker ratings
apply to your product:
In-line fuse rating
Thermal breaker rating
10 A
7 A (if only connecting one
device)
Note:
• The suitable fuse rating for the thermal breaker
is dependent on the number of devices you are
connecting. If in doubt consult an authorized
Raymarine
®
dealer.
• Your product’s power cable may have fitted in-line
fuse, if not then you can add an in-line fuse to the
positive wire of your products power connection.
Sharing a breaker
Where more than 1 piece of equipment shares a
breaker you must provide protection for the individual
circuits. E.g. by connecting an in-line fuse for each
power circuit.
D11637-2
2
4
4
1
3
+
-
1
Positive (+) bar
2
Negative (-) bar
3
Circuit breaker
4
Fuse
Where possible, connect individual items of equipment
to individual circuit breakers. Where this is not possible,
use individual in-line fuses to provide the necessary
protection.
Connecting the Fistmic – Ray60 / Ray70
The Fistmic can be connected directly to the connector
on the front of the unit.
1. Ensure the Fistmic cable connector is correctly
orientated.
2. Fully insert the connector into the connector on the
front of the unit.
3. Rotate the locking collar clockwise until it clicks.
SeaTalk
ng®
connection
The product can interface with Raymarine
®
GPS
or GNSS receivers and Raymarine
®
multifunction
displays using the SeaTalk
ng®
connection.
A Raymarine
®
SeaTalk
ng®
GPS or GNSS receiver
cannot be connected directly to the product, as GPS
and GNSS receivers are powered via the SeaTalk
ng®
backbone.
Connecting SeaTalk
ng®
Before connecting to SeaTalk
ng®
, refer to the
SeaTalk
ng®
Reference Manual, to ensure that the
maximum permitted Load Equivalence Number (LEN),
for the SeaTalk
ng®
backbone is not exceeded once this
product is connected.
1. Rotate the SeaTalk
ng®
connector’s locking collar
anti clockwise, to the unlocked position.
2. Ensure the spur cable connector is correctly
orientated.
14
Ray50 / Ray60 / Ray70