Raymarine RMK-10 Installation Instructions Manual - Declaration
Note: Where constraints on the installation
prevent any of the above recommendations,
always ensure the maximum possible separation
between different items of electrical equipment, to
provide the best conditions for EMC performance
throughout the installation
Declaration
of conformity
Raymarine
UK Ltd. declares that this product is
compliant
with the essential requirements of EMC
directive
2004/108/EC.
Product
disposal
Dispose
of this product in accordance with the
WEEE
Directive.
The
Waste Electrical and Electronic Equipment
(WEEE)
Directive requires the recycling of waste
electrical
and electronic equipment.
Warranty
registration
It
is important that you register your product to
receive
full warranty benefits. Your unit package
includes
a bar code label indicating the serial number
of
the unit. You will need this serial number when
registering
your product online. You should retain
the
label for future reference.
IMO
and SOLAS
The
equipment described within this document
is
intended for use on leisure marine boats and
workboats
NOT covered by International Maritime
Organization
(IMO) and Safety of Life at Sea
(SOLAS)
Carriage Regulations.
Technical
accuracy
To
the best of our knowledge, the information in this
document
was correct at the time it was produced.
However,
Raymarine cannot accept liability for any
inaccuracies
or omissions it may contain. In addition,
our
policy of continuous product improvement may
change
specifications without notice. As a result,
Raymarine
cannot accept liability for any differences
between
the product and this document.
8