Raymarine ST60 Tridata Owner's Handbook Manual - Flush Mounting
Other manuals for ST60 Tridata:
Owner's Handbook Manual, Quick Start Manual, Owner's Handbook Manual, Setup & Operation, Operating Manual, Quick Start Manual, Commissioning Manual, Owner's Handbook Manual, Owner's Handbook Manual, Owner's Handbook Manual, Owner's Handbook Manual, Owner's Handbook Manual, Owner's Handbook Manual, Owner's Handbook Manual, Owner's Handbook Manual
Manual is about: Raymarine ST60 Tridata Instrument Owner's Handbook
of
38
Chapter 3: Installation
11
7. Mount the assembled instrument, studs, bezel and gasket into the panel.
Secure from behind with the thumb nuts (5).
Flush mounting
The Flush Mounting Kit uses a low-profile bezel to reduce the fitted profile of the
instrument to approximately 0.25 in (6 mm) above the panel fascia.
Fitting the low-profile bezel
In order to flush-mount your ST60 instrument, replace the standard bezel with the
low-profile bezel as follows:
1. Hold the instrument in both hands with the display towards you.
D4331-2
Surface mounting
4
1
2
1
3
5
2
5
D4537-2