Rayovac Multi-System Charger 3-1 User Manual - page 4
.
size batteries fit into the bottom portion of each
battery compartment (Figure 3) and
(due to their
the light does
not
go
on,
check to ensure:
larger size) fit into the upper portion of the
compartment. (Figure 4). Your Rayovac Multi-System
Charger will charge up to four
or
at a time.
Each of the four battery compartments only holds one
battery at a time.
3. Close the charge cover.
4. Plug the Charger directly into any
wall socket (standard 220-240 volt
AC outlet).
5. Look for the green LED light to go
on (Figure 5). The light indicates
the battery in that compartment
is inserted correctly and taking a
charge.
Figure 3
Positive(+) sign on battery
matches (+) sign on the
Charger.
Battery is properly seated in
the compartment.
Charger is fully plugged into
electrical wall outlet.
Green
Lights
Figure 5
Battery needs charging may already be
fully charged).
The compartment is not empty (empty
compartments will not light green LED).
Occasionally, a Rayovac Rechargeable Alkaline Battery
inserted correctly may not cause the charging light to go
on. Leave it in the Charger, and check it in one hour.
If the light still does not go on, discard the battery.
The green LED lights will go out when batteries are
fully charged. Unplug the Charger before removing
batteries. Batteries will charge overnight.
Figure 4