Rayovac Multi-System Charger 3-1 User Manual - page 6
.
Nickel Metal Hydride
batteries should not be stored for long periods as
they lose approximately
of their power daily in
storage.
Nickel Cadmium (Ni-Cd)
Ni-Cd batteries should be completely drained before
recharging to avoid any “memory problem.”
Ni-Cd batteries should not be stored for long periods
as they lose approximately
of their power daily in
storage.
FOR OPTIMAL CHARGING PERFORMANCE IN ALL
SYSTEMS, LEAVE BATTERIES IN YOUR CHARGER
UNTIL GREEN CHARGING LIGHTS GO OUT. THIS
WILL ENSURE A FULL CHARGE.
WARNING: Rayovac Rechargeable Alkaline Batteries are
designed to charge only with a Rayovac Multi-System
Charger. If used in any other battery charger, batteries may
become hot, explode, leak or rupture, causing personal
injury or property damage.
.
The Rayovac Multi-System PSI Charger is designed to
recharge Rayovac Rechargeable Alkaline, Nickel Cadmium
(Ni-Cd) and Nickel Metal Hydride
AA or AAA size
batteries. DO NOT MIX DIFFERENT BATTERY SYSTEMS
TOGETHER WHEN CHARGING E.G. DO NOT MIX
RECHARGEABLE ALKALINE
WITH
RAYOVAC NICKEL METAL HYDRIDE BATTERIES EACH
BATTERY TYPE MUST BE CHARGED SEPARATELY.
Never charge regular, single-use alkaline batteries in
the
Rayovac Multi-System Charger. Charging single use
batteries may cause them to become hot, leak or rupture
causing personal injury or property damage.
NOTE: The Multi-System Charger will become warm when
batteries are charging- this is normal. As with all electric
appliances to reduce the risk of electric shock, unplug your
Charger from the outlet before cleaning. Never immerse
Charger in water or any other liquid. Do not expose the
Charger to rain or snow. Shock hazards may result.