1 www.Rivatech.De quick installation guide this manual provides instructions for quick installation and basic configuration of your ip device..
2 www.Rivatech.De step1. Connect cables to ip device connect required cables to the device including the power cable, lan cable, and other optional cables. To see the correct positions of all connectors, refer to the following image below. The device is polarity sensitive. Incorrect power connection...
3 www.Rivatech.De step2. Install ip device 1) place the installation template that is provided in the package on the desired position of installation. 2) drill four holes on the template and insert anchor blocks into the holes. Fasten the camera with screws. 3) insert the camera body to the installa...
4 www.Rivatech.De step3. Set the lens position 1) remove the dome cover. 2) pan and tilt the lens to the desired position by pressing buttons on the body in the following directions. Rotate the lens by moving after loose screw behind the lens as marked below and fasten the screw after finish the rot...
5 www.Rivatech.De step4. Set up network environment the default ip address of the device is 192.168.Xxx.Xxx. Users can identify the ip address of the device from converting the mac address’s hexadecimal numbers, which is attached to the device. Be sure that the device and pc are on a same area netwo...
6 www.Rivatech.De ipadmintool is a management tool, which automatically scans all of the network products for users to perform administrative tasks, which includes network configurations, firmware update, device reboot, and device organizations. To modify the device’s default ip address for customiz...
7 www.Rivatech.De 3. In the ip setup’s window, information under ‘local network information’ displays the user/pc’s network area information. Those information need to be incorporated to the ip address, subnet mask, gateway, and dns boxes, except the last 2 sets of ip address, which are to be the un...
8 www.Rivatech.De caution ! 2. Setup.Exe installation link or pop-up window appears, depends on microsoft® internet explorer version. Proceed with rest of setup installation. 3. Follow the instructions of the dialog boxes and complete the installation. Once the installation is complete, start the we...
9 www.Rivatech.De rebooting perform the following procedures to reset your device: 1. While the device is on, press the reset button for 1~2 seconds. 2. Wait for the system to reboot. Resetting to the factory default settings when reset the device to the factory default setting, all parameters inclu...
10 www.Rivatech.De hexadecimal-decimal conversion table refer to the following table when you convert the mac address of your device to ip address. Hex dec 00 0 01 1 02 2 03 3 04 4 05 5 06 6 07 7 08 8 09 9 0a 10 0b 11 0c 12 0d 13 0e 14 0f 15 10 16 11 17 12 18 13 19 14 20 15 21 16 22 17 23 18 24 19 2...
