1 www.Rivatech.De quick installation guide this manual provides instructions for quick installation and basic configuration of your ip device..
2 www.Rivatech.De step1. Connect cables to ip device connect required cables to the device including the power cable, lan cable, and other optional cables. To see the correct positions of all connectors, refer to the following image below. Make sure the polarity is correct. Incorrect connection may ...
3 www.Rivatech.De step2. Install ip device caution ! 1) place the installation template that is provided in the package on the desired position of installation. 2) attach the waterproof protection pad on the bottom plate of the device. 3) drill three holes on the template and insert anchor blocks in...
4 www.Rivatech.De step3. Set the lens position 1) remove the dome cover. 2) adjust the lens to the desired position by manually moving its body in the following directions. After adjustment, fasten the screw of the rotation axis. Connect to the web page of the device to see its real-time image. Refe...
5 www.Rivatech.De step4. Set up network environment the default ip address of your ip device is 192.168.Xxx.Xxx. You can find the available ip address from the mac address of your device. Please make sure the device and your pc are on the same network segment before running the installation generic ...
6 www.Rivatech.De custom ip environment ipadmintool and the manual are provided on usb stick or can download from www.Rivatech.De homepage. Ipadmintool is a management tool, which automatically scans all of the network products for users to perform administrative tasks, which includes network config...
7 www.Rivatech.De 3. In the ip setup’s window, information under ‘local network information’ displays the user/pc’s network area information. Those information need to be incorporated to the ip address, subnet mask, gateway, and dns boxes, except the last 2 sets of ip address, which are to be the un...
8 www.Rivatech.De step5. View video on web page once the device has the proper ip address, users can view the live streaming images through a web browser. The default username and password is root / pass. 1. When the device’s web address is accessed, the browser asks to install the activex. Click al...
9 www.Rivatech.De caution ! 3. Follow the instructions of the dialog boxes and complete the installation. Once the installation is complete, start the web browser again and check if video stream is displayed in the main view frame. If “ this software requires the microsoft xml parser v6 or higher. P...
10 www.Rivatech.De rebooting perform the following procedures to reset your device: 1. While the device is on, press the reset button for 1~2 seconds. 2. Wait for the system to reboot. Resetting to the factory default settings when reset the device to the factory default setting, all parameters incl...
11 www.Rivatech.De hexadecimal-decimal conversion table refer to the following table when you convert the mac address of your device to ip address. Hex dec 00 0 01 1 02 2 03 3 04 4 05 5 06 6 07 7 08 8 09 9 0a 10 0b 11 0c 12 0d 13 0e 14 0f 15 10 16 11 17 12 18 13 19 14 20 15 21 16 22 17 23 18 24 19 2...
