1. DL manuals
  2. Riva
  3. Security Camera
  4. RC3702HD-5314
  5. Installation Manual

Riva RC3702HD-5314 Installation Manual

Other manuals for RC3702HD-5314: Quick Installation Manual

Summary of RC3702HD-5314

  • Page 1

    1 www.Rivatech.De rc3702hd-5314 installation guide.

  • Page 2

    2 rc series rc3702 installation guide www.Rivatech.De information to user caution risk of electric shock, do not open caution: to reduce the risk of electric shock, do not remove cover (or back). Contact qualified service personnel for internal parts. This symbol is intended to alert the user the pr...

  • Page 3

    3 rc series rc3702 installation guide www.Rivatech.De table of contents 1. Features ......................................................................................................... 4 2. Package contents ...................................................................................... 5...

  • Page 4

    4 rc series rc3702 installation guide www.Rivatech.De 1. Features camera full hd outdoor fixed dome ip camera (vandal proof) high quality compression in real time streaming 1/2.7” high quality cmos image sensor true day / night (icr) remote zoom/focus control(one click af) streaming dual streaming m...

  • Page 5

    5 rc series rc3702 installation guide www.Rivatech.De 2. Package contents unpack carefully and handle the equipment with care. The packaging contains: camera dc power adaptor dc jack cable 8-pin and 2-pin terminal block s-video jack to 3.5mm plug screws and anchors side plug hex wrench driver side c...

  • Page 6

    6 rc series rc3702 installation guide www.Rivatech.De 3. Part names 1.Rest button the reset button can be used for restarting the device or resetting it to factory default. 2.Focus buttons use the buttons to manually/automatically determine correct focus. 3.Zoom in/out buttons use the buttons for ca...

  • Page 7

    7 rc series rc3702 installation guide www.Rivatech.De 4.Pal/ntsc button pressing the button cycles through pal, ntsc, and no video output mode: no video output -> pal->ntsc 5.Video stereo jack connector connector for 3.5mm video jack plug. 6.Microsd sd card supports up to 32gb 7.Tilt buttons use the...

  • Page 8

    8 rc series rc3702 installation guide www.Rivatech.De 4. Installation 1) place the installation template (paper) that is included in the package on the desired installation surface. 2) drill three holes in correct positions based on the template paper, and insert anchor blocks into the holes. 3) whe...

  • Page 9

    9 rc series rc3702 installation guide www.Rivatech.De 4.1. Installation template installation template image’s size scale in this installation guide is not 1:1. The correct-size template design paper can be found inside the package separately. Caution ! Installation template 37 v1.0

  • Page 10

    10 rc series rc3702 installation guide www.Rivatech.De 4.2. Setting the lens position 1) remove the dome cover to control the positioning buttons, or use web site setup (setup > video & audio >repositioning) to adjust the camera. 2) refer to 3. Part names for the button locations; to pan, use ‘+’ an...

  • Page 11

    11 rc series rc3702 installation guide www.Rivatech.De lifespan of pan and tilt are approximately good up to 5,000 counts each. 4.3. Setting the image attribute through the camera’s webpage, users can configure image settings. The camera image’s brightness, contrast, saturation and sharpness are adj...

  • Page 12

    12 rc series rc3702 installation guide www.Rivatech.De 5. Connections 1.Audio input/output the camera has a mono audio input and a mono audio output. Due to low audio output power, an amplified speaker is recommended for enhanced sound (do not connect a headphone or earphone directly to the camera)....

  • Page 13

    13 rc series rc3702 installation guide www.Rivatech.De 2.Sensor (di) connection the camera provides 1 channel d/i. It can be connected to either a voltage type sensor or a relay type sensor as the following figures. Settings can be done through the camera’s webpage input voltage range: 0vdc minimum ...

  • Page 14

    14 rc series rc3702 installation guide www.Rivatech.De must connect gnd port which is located end of the do terminal block side. 4.Lan connector this is a 10/100 base-t ethernet cable. Use rj45 coupler to extend the cable. 5.12v dc power a 12 dc power connector is required for this device. Caution !...

  • Page 15

    15 rc series rc3702 installation guide www.Rivatech.De 6. Configuration 6.1.Set up network environment the default ip address of the device is 192.168.Xxx.Xxx. Users can identify the ip address of the device from converting the mac address’s hexadecimal numbers, which is attached to the device. Be s...

  • Page 16

    16 rc series rc3702 installation guide www.Rivatech.De 3. Web streaming and device configurations are supported through activex program. When the activex installation window appears, authorize and install the activex. 6.1.2. Custom ip environment ipadmintool and the manual can download from www.Riva...

  • Page 17

    17 rc series rc3702 installation guide www.Rivatech.De 3. In the ip setup’s window, information under ‘local network information’ displays the user/pc’s network area information. Those information need to be incorporated to the ip address, subnet mask, gateway, and dns boxes, except the last 2 sets ...

  • Page 18

    18 rc series rc3702 installation guide www.Rivatech.De 1. When the browser asks to install the axumf software, click install to proceed. 2. When setup installation pop-up window appears, click install to proceed with rest of installations. Depends on system os and internet explorer version, installa...

  • Page 19

    19 rc series rc3702 installation guide www.Rivatech.De caution ! 6.2.1. View video using ipadmin tool ipadmintool automatically searches all activated network encoders and ip cameras and shows the product name, ip address, mac address and etc. Ipadmintool can download from www.Rivatech.De homepage. ...

  • Page 20

    20 rc series rc3702 installation guide www.Rivatech.De 6.3. Reset refer to 3. Part names for the reset button location. Perform the following procedures to reset your device: 1. Push the reset button and hold for 1~2 seconds. The red led lights up. 2. Wait for the system to reboot. 6.4. Factory defa...

  • Page 21

    21 rc series rc3702 installation guide www.Rivatech.De appendix (a): specifications summary camera module cmos image sensor 1/2.7” 1080p cmos effective pixels 1920x1080 scanning system progressive scanning electric al resolution 1920 x 1080 min. Illumination color: 0.5 lux, f1.2 bw: 0.001 lux (b/w, ...

  • Page 22

    22 rc series rc3702 installation guide www.Rivatech.De ddns, ssl v2/v3, ieee 802.1x, snmp v2/v3 sd slot supported (microsd) ※ micro sd card not included (recommend class 4 and higher for hd recordings) * when vca is activated, frame rate is limited to max 15fps@1080p. Limitation is based on v.1.4.0 ...

  • Page 23

    23 rc series rc3702 installation guide www.Rivatech.De appendix (b): power over ethernet the power over ethernet (poe) is designed to extract power from a conventional twisted pair category 5 ethernet cable, conforming to the ieee 802.3af power-over- ethernet (poe) standard. Ieee 802.3af allows for ...

  • Page 24

    24 rc series rc3702 installation guide www.Rivatech.De power classification the poe power class supported by the ip device is class 0. Class usage minimum power levels output at the pse maximum power levels at the powered device 0 default 15.4w 0.44 to 12.95w unlike the other way, disconnecting pse ...

  • Page 25

    25 rc series rc3702 installation guide www.Rivatech.De appendix (c): dimensions (unit: mm).

  • Page 26

    26 rc series rc3702 installation guide www.Rivatech.De appendix (d): hexadecimal- decimal conversion table refer to the following table when you convert the mac address of your device to ip address. Hex dec hex dec hex dec hex dec hex dec hex dec hex dec 0 0 25 37 4a 74 6f 111 94 148 b9 185 de 222 1...

  • Page 27

    27 rc series rc3702 installation guide www.Rivatech.De revision history man# date(m/d/y) comments 01a.00 09/25/2012 first release version 01a.01 10/05/2012 operation temp. Confirmed 01a.02 10/12/2012 pan/tilt range and speed spec and description added 01a.03 10/29/2012 setup procedure description up...