Riva RC3702HD-5314 Quick Installation Manual

Other manuals for RC3702HD-5314: Installation Manual

Summary of RC3702HD-5314

  • Page 1

    1 www.Rivatech.De quick installation guide this manual provides instructions for quick installation and basic configuration of your ip device..

  • Page 2

    2 www.Rivatech.De step1. Connect cables to ip device connect required cables to the device including the power cable and lan cable. To see the correct positions of all connectors, refer to the following image below. Make sure the polarity is correct. Incorrect connection may cause malfunction or dam...

  • Page 3

    3 www.Rivatech.De step2. Install ip device to prevent products from damaging, place the camera on stable and non- vibrating surfaces. If the stability is in doubt, consult with safety personnel for reinforcements, and then proceed with the installation. Caution ! 1) place the installation template (...

  • Page 4

    4 www.Rivatech.De step3. Set the lens position 1) remove the dome cover to control the positioning buttons, or use web site setup (setup > video & audio >repositioning) to adjust the camera. 2) positioning buttons are located on the main body. To pan, use ‘+’ and ‘–‘pan buttons. To tilt, use ‘+’ and...

  • Page 5

    5 www.Rivatech.De lifespan of pan and tilt are approximately good up to 5,000 counts each. Operating temperature ranges for pan and tilt are 10˚c ~ 40 ˚c (50˚f ~ 104˚f) step4. Set up network environment the default ip address of the device is 192.168.Xxx.Xxx. Users can identify the ip address of the...

  • Page 6

    6 www.Rivatech.De custom ip environment ipadmintool and the manual are provided on www.Rivatech.De homepage. Ipadmintool is a management tool, which automatically scans all of the network products for users to perform administrative tasks, which includes network configurations, firmware update, devi...

  • Page 7

    7 www.Rivatech.De 3. In the ip setup’s window, information under ‘local network information’ displays the user/pc’s network area information. Those information need to be incorporated to the ip address, subnet mask, gateway, and dns boxes, except the last 2 sets of ip address, which are to be the un...

  • Page 8

    8 www.Rivatech.De 1. When the device’s web address is accessed, the browser asks to install the activex. Click allow. 2. Setup.Exe installation link or pop-up window appears, depends on microsoft® internet explorer version. Proceed with rest of setup installation. 3. Follow the instructions of the d...

  • Page 9

    9 www.Rivatech.De rebooting perform the following procedures to reset your device: 1. Press the reset button for 2 seconds. 2. When the power led turns to red, wait for the system to reboot. Resetting to the factory default settings resetting the device back to the factory default will initialize al...

  • Page 10

    10 www.Rivatech.De hexadecimal-decimal conversion table refer to the following table when you convert the mac address of your device to ip address. Hex dec hex dec hex dec hex dec hex dec hex dec hex dec 0 0 25 37 4a 74 6f 111 94 148 b9 185 de 222 1 1 26 38 4b 75 70 112 95 149 ba 186 df 223 2 2 27 3...

  • Page 11

    11 www.Rivatech.De 22 34 47 71 6c 108 91 145 b6 182 db 219 23 35 48 72 6d 109 92 146 b7 183 dc 220 24 36 49 73 6e 110 93 147 b8 184 dd 221.