RJM MasterMind User Manual - page 23
17
CC1 - Continuous Controller #1
(CC value range: =000 - =127, =--- (send no CC), Default value: 000)
Sets the value for the first Continuous Controller destination. Press 4 / CC Value to set the value, or press 3 / CC On/Off
to quickly toggle between the most commonly used values: =000 and =127.
CC2 - Continuous Controller #2
(CC value range: =000 - =127, =--- (send no CC), Default value: 000)
Sets the value for the second Continuous Controller destination. Press 4 / CC Value to set the value, or press 3 / CC
On/Off to quickly toggle between the most commonly used values: =000 and =127.
CC3 - Continuous Controller #3
(CC value range: =000 - =127, =--- (send no CC), Default value: 000)
Sets the value for the third Continuous Controller destination. Press 4 / CC Value to set the value, or press 3 / CC On/Off
to quickly toggle between the most commonly used values: =000 and =127.
CC4 - Continuous Controller #4
(CC value range: =000 - =127, =--- (send no CC), Default value: 000)
Sets the value for the fourth Continuous Controller destination. Press 4 / CC Value to set the value, or press 3 / CC
On/Off to quickly toggle between the most commonly used values: =000 and =127.
CC5 - Continuous Controller #5
(CC value range: =000 - =127, =--- (send no CC), Default value: 000)
Sets the value for the fifth Continuous Controller destination. Press 4 / CC Value to set the value, or press 3 / CC On/Off
to quickly toggle between the most commonly used values: =000 and =127.
CC6 - Continuous Controller #6
(CC value range: =000 - =127, =--- (send no CC), Default value: 000)
Sets the value for the sixth Continuous Controller destination. Press 4 / CC Value to set the value, or press 3 / CC On/Off
to quickly toggle between the most commonly used values: =000 and =127.
CC7 - Continuous Controller #7
(CC value range: =000 - =127, =--- (send no CC), Default value: 000)
Sets the value for the seventh Continuous Controller destination. Press 4 / CC Value to set the value, or press 3 / CC
On/Off to quickly toggle between the most commonly used values: =000 and =127.
CC8 - Continuous Controller #8
(CC value range: =000 - =127, =--- (send no CC), Default value: 000)
Sets the value for the eighth Continuous Controller destination. Press 4 / CC Value to set the value, or press 3 / CC
On/Off to quickly toggle between the most commonly used values: =000 and =127.
Exiting Setup Mode
To exit Setup Mode, press and hold the 1 / Function Select button, then press the 3 / CC On/Off button, then release
both buttons. The MasterMind will return to normal operating mode and the Setup Mode indicator will stop flashing.
It’s important to note that your changes are not saved until you exit Setup Mode. Be sure to exit Setup Mode before
removing power from the MasterMind.