Accompanying documentation babyface class compliant mode technical background, mode of operation, practical use.
Rme tech info babyface class compliant 2 background information on class compliant operation of the babyface 1. History and general remarks the babyface has not been developed with stand-alone mode and ipad in mind. Therefore using these two new modes require some special attention on how to deliver...
Rme tech info babyface class compliant 3 2. System requirements ¾ babyface with firmware > 200 and activated class compliant mode ¾ any apple ipad with at least ios 5. Iphone and ipod touch can not be used. ¾ apple ipad camera connection kit (dock or lightning to usb) 3. Operation activation of the ...
Rme tech info babyface class compliant 4 having tested several chinese replicas of the apple camera connection kit, from 2-in-1 to 5-in-1 adapters, we strongly recommend purchasing the original! All adapters seemed to work for the simple application of copying photos. Attempting to run the babyface ...
Rme tech info babyface class compliant 5 class compliant mode under windows, mac os x and linux on a windows pc, class compliant mode is indicated by a missing “rme“ in the device name shown in the device manager. In the correct mode and with installed drivers, the full name including rme is shown, ...
Rme tech info babyface class compliant 6 4. Supported inputs and outputs in mac os x, either the first two or all channels will work, depending on the choice in the audio midi setup. The playback signal of channels 1/2 can be copied to outputs 3/4 by the babyface onboard mixer. When connected to an ...
Rme tech info babyface class compliant 7 5. Operation at the unit operation at the unit is very similar to the one under windows and os x, with some additions for the new modes. These were done as intuitive and easy to remember as possible, but with three elements to operate only there must be some ...
Rme tech info babyface class compliant 8 the last available setting might look quite complicated or cumbersome, but it is done not so often, and many users will never do it at all: set clock mode and sample rate use select key and select “out” push and hold the encoder until one of the nine level le...
Rme tech info babyface class compliant 9 7. Useful notes stand-alone mode as one wants to place the usb power supply not beside the babyface, but further away into a power outlet, a cheap usb cable extension, male to female, might be used to bridge the distance. Unfortunately our (and our customer’s...
