Road Angel 6000 User Manual - 4. Getting Started
15
4. Getting Started
Switching On for the First Time
1. Park your vehicle so that ROAD ANGEL Navigator has a clear view of
the sky away from obstacles such as tall buildings and over-hanging
trees (these may delay or prevent satellite acquisition).
2. Plug the power lead into the cigar lighter socket. If your socket is
ignition-switched you will need the ignition to be on. The power indicator
light on the unit should now be on (make sure the power switch on the
back of the unit is in the On position (see page 12). The display shows
the Welcome screen whilst the unit is starting up.
3. If you haven’t updated the ROAD ANGEL Navigator screen will then
show the registration prompt. Tap on the Exit button (please return to
section 1 and register and update your unit as soon as possible).
4. ROAD ANGEL Navigator now tries to identify its location by acquiring
information from GPS satellites. This may take a few minutes. During
the procedure, the unit displays the following screen.