Road Angel Halo User Manual - page 9

Camera Installation

1. Inserting the memory card

Insert the supplied Micro SD card into the slot as per the 

illustration on the right, being careful to insert it the correct 

way around. Inserting the Micro SD card will automatically 

format the card for use with Halo.

2. Installing Halo in your vehicle

It is recommended that Halo is mounted in an elevated 

position in your vehicle, with a location between the rear 

view mirror and the windscreen being particularly effective.

Halo is affi xed to the windscreen using the sticky pad 

supplied. Simply remove the backing material and apply 

pressure to ensure a secure fi x.

16

17

BEFORE YOU START

3.  Powering Halo

Using the power lead supplied, plug Halo into your vehicle’s 

cigarette lighter socket. A red LED will illuminate and an 

audible alarm will sound. The red LED will then change to 

blue, signifying that Halo has commenced recording.

4. Camera angle and cable management

Pay particular attention to the angle of the camera to 

ensure that it has an unobstructed line of sight and is angled 

correctly to cover the widest possible viewing area.

Use the self-adhesive wire retention clips supplied to 

channel any visible cables away from your fi eld of view 

and to maintain a tidy interior. Alternatively cables can be 

hidden in the vehicle by a professional installer.