Road Angel Navigator User Manual - Deleting Zones
6. Adding and Deleting Danger Zones
Road Angel Group Ltd. are constantly updating the central database of
danger zones. You can be of great value to all ROAD ANGEL Navigator
users by adding any new zones you encounter to your unit's own database.
When you subsequently update your ROAD ANGEL Navigator, this data
can be verified by Road Angel Group Ltd before being added to the central
file .
PLEASE ONLY ADD OR DELETE DANGER ZONES WHEN IT IS
SAFE TO DO SO.
Deleting zones
You can delete any of the locations stored in the ROAD ANGEL Navigator
database. When your ROAD ANGEL Navigator alerts you to the required
danger zone:
1. Press the DELETE (“D”) button on the front of the unit (see page 2).
2. Confirm the deletion by pressing DELETE again.
When a location has been deleted it can only be restored by re-
entering the location (see Adding new locations, below) or by
requesting a factory reset for your next update: email
support@blackspot.com with your serial number and contact details.
Note: By using a factory reset all your personally stored
locations will be lost.
Adding new locations
You may add new locations to the FIXED, MOBILE, AVERAGE,
BLACKSPOT and SCHOOL areas of your ROAD ANGEL Navigator
database. When you update your ROAD ANGEL Navigator these new
locations will also be downloaded to the central database, and can then be
verified by Blackspot technicians for inclusion in future updates.
ROAD ANGEL Navigator needs to be travelling in excess of 4 MPH
to calculate the heading for the location.
When your vehicle is precisely alongside the new location:
1. Press the STORE (“S”) button on the front of the unit (see page 2). This
will confirm your location.
2. Choose the type of warning and then the speed limit.
3. Press STORE to confirm your choice.
38